How to reset the tire pressure monitoring on the Verano?

1 Answers
Keegan
07/30/25 6:58am
To reset the tire pressure monitoring on the Verano, simply press and hold the checkmark button on the steering wheel until you hear an alarm sound. More details are as follows: 1. The Buick Verano is equipped with a Tire Pressure Monitoring System (TPMS), which alerts the driver when low tire pressure is detected. When low tire pressure is detected, the TPMS will illuminate the tire pressure indicator on the instrument cluster. The Driver Information Center (DIC) will display a message to check the tire pressure. 2. The indicator light and message will appear during each ignition cycle until the tires are inflated to the correct pressure. If the indicator light comes on, you should stop as soon as possible and inflate the tires to the recommended pressure shown on the tire pressure label. In cold weather, the tire pressure indicator may illuminate when the vehicle is first started and then turn off after driving. This may be an early warning that the tire pressure is decreasing, and the tires need to be inflated to the correct pressure. Although the TPMS can warn of low tire pressure, it cannot replace normal tire maintenance.
Was this review help?
6
5
Share
More Forum Discussions

What to Do When a Car Gets Flooded?

Push the car to a higher ground area without water accumulation, remove all items from the cabin, and then inspect components such as wiring and the computer for any short circuits or burnouts. Call the insurance company and have the car towed to a repair shop to assess the flooding damage. Vehicle flooding can be categorized into two scenarios: 1. Flooding while driving: Water can enter the engine through two main pathways: first, due to the low position of the engine air intake, water can be sucked into the engine during wading; second, if the exhaust pipe outlet is below the water level, water can be drawn into the engine through the exhaust pipe during wading. It's easy to understand how water enters through the air intake—when the engine "releases throttle," the sudden drop in RPM creates a momentary negative pressure in the exhaust pipe. The strong atmospheric pressure then forces water into the exhaust pipe, as if the exhaust pipe is sucking in the water. 2. Flooding while parked: If the car is parked in a low-lying area with poor drainage, it may get flooded during heavy rain. After flooding, external water can enter the cabin through gaps like door seams and the external air circulation channels of the air conditioning system. This usually results in the carpet below the seats being completely soaked. If the external water level is high, the battery and some electrical components may also be damaged by water. For vehicles severely flooded while parked, repair shops typically remove all items from the cabin, inspect wiring and computer components for short circuits or burnouts, and replace damaged parts if necessary. As for the soaked carpets and interior trim, they can be cleaned and dried.
17
1
Share

What Documents to Bring for the First Car Maintenance?

Items required for the first maintenance include: driver's license; vehicle registration book; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance institution for the vehicle's first service. Important note: Make an appointment with the 4S store in advance. The first maintenance refers to the initial service after a new car has been driven, with the specific timing varying by vehicle, typically after driving 1,000 to 3,000 kilometers. It's essential to attend the first maintenance promptly, neither ahead of schedule nor delayed. The completion of the first maintenance signifies the end of the car's break-in period, allowing it to be driven under standard load and normal speed as required by the vehicle. The timing for the first insurance is calculated based on the car pickup date. There are two indicator values for the first maintenance: mileage and time. Whichever comes first serves as the standard. First maintenance tasks include: changing the engine oil and oil filter, cleaning the air filter, checking various fluid levels for normality, inspecting the generator belt and wiper blades for damage, checking tire pressure for normality, and examining tires for damage or bulges. Estimated time required: Approximately 2 hours to complete all tasks. The most crucial aspect of a new car's first maintenance is changing the engine oil and oil filter. When replacing the engine oil, the oil filter must also be changed simultaneously. The selection of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car body with water: Many people clean their cars during holidays, washing the body with water and wiping it with a cloth. It's important to note that the interior of the car body should not be directly washed with water. If the floor mats are dirty, use a vacuum cleaner or take them out to brush with detergent, dry them, and then put them back. There are many holes under the rubber mats on the cabin floor. Water entering these areas won't dry but will flow through the holes to parts like the gearbox, causing erosion and corrosion. The best practice is to clean with a vacuum and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it's advised to drain the antifreeze and add the same brand from the start. Different brands of antifreeze have vastly different chemical properties. Various functional additives may corrode others. Different brands of antifreeze use different additives, so they should not be mixed to avoid unnecessary issues. Do not lubricate tire bolts and nuts: When bolts on a moving car rust, they are often oiled to function again. Some people apply lubricant to wheel bolts and nuts to prevent rust, but this poses a safety risk. At high speeds, bolts and nuts can loosen or even fall off, leading to driving malfunctions. No need to press the accelerator when starting an EFI car: The starter of an Electronic Fuel Injection (EFI) car differs from that of a regular car. Its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and operating conditions, ensuring smooth starting.
5
1
Share

What Causes the Buick Engine Warning Light to Illuminate?

The main reasons for the engine warning light to illuminate include sensor issues, car maintenance problems, fuel quality issues, poor combustion of the air-fuel mixture, engine intake problems, turbocharging issues, exhaust system problems, and anti-theft system malfunctions. Additionally, when starting the car, the vehicle performs a self-check on the engine system. Normally, the engine warning light should turn off after the self-check is completed. If it remains on for an extended period, it is advisable to seek professional help at a service station to diagnose and eliminate potential safety hazards. Below is a detailed explanation of each type of fault: Sensor Issues: Sensors include those for coolant temperature, crankshaft position, air flow, intake temperature, and oxygen. When these sensors are damaged, have poor connections, or experience signal interruptions, the car's ECU cannot accurately obtain engine data, leading to the illumination of the engine warning light. In such cases, it is important to visit a service center promptly for professional diagnosis and resolution. Maintenance Issues: Poor engine maintenance is one of the most common causes of the engine warning light illuminating. Vehicles have specific maintenance schedules, and failing to adhere to them, combined with poor driving habits, can increase the burden on the engine, eventually triggering the warning light. Fuel Quality Issues: This refers to both fuel and engine oil. The fuel used in cars typically has specific octane ratings, and engine oil can be semi-synthetic or fully synthetic. Manufacturers usually recommend the appropriate fuel and oil types. If the owner fails to use the recommended types, prolonged use can lead to engine wear, causing the warning light to illuminate. Always use the recommended fuel and engine oil for your vehicle. Poor Combustion of Air-Fuel Mixture: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can lead to poor combustion of the air-fuel mixture. This can result in engine carbon buildup or knocking, which the oxygen sensor detects and reports to the ECU, triggering the warning light. Intake Issues: The engine requires air for combustion, and the air filter plays a crucial role in this process. If the air filter is dirty or not cleaned regularly, it can affect the engine's air intake, potentially leading to blockages and, in severe cases, the illumination of the engine warning light. Turbocharging Issues: Problems with the intake turbocharging pipes or the turbocharger can also cause the engine warning light to illuminate. The most common issue is a damaged turbocharger, which may also lead to symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust Issues: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can trigger the engine warning light. The most common issue is a malfunctioning catalytic converter, which can be caused by using leaded gasoline, lead- or silicon-based oil additives, physical damage to the catalytic converter, or fuel system faults. Anti-Theft System: If the car's electronic anti-theft system malfunctions or the anti-theft controller is incompatible with the engine control unit, the anti-theft system can prevent the engine from operating normally, accompanied by the illumination of the engine warning light. Solutions for the Engine Warning Light: If the engine warning light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine warning light is on and the car is drivable but exhibits severe shaking or loss of power, pull over safely and call for roadside assistance. If the engine warning light is on but the car drives normally, this may indicate a sensor fault. In such cases, you can continue driving cautiously at low speeds but should visit a repair shop as soon as possible to address the issue.
20
4
Share

What to do if the paint of Geely Vision X3 peels off?

You can purchase a touch-up pen that matches your car's color at an auto repair shop or online, and follow the instructions to repair the peeling area. If the peeling area is large and you don't have time to repair it, you can use a spray paint of the corresponding color to treat it. Just spray evenly when applying. For areas with minor peeling or slight scratches that are not obvious, you can apply toothpaste to treat them, which can also provide temporary rust-proof isolation. If the peeling is deep, you can go to an auto beauty shop for wax polishing or professional spray painting.
15
5
Share

Can Second-hand Cars in Shenzhen Be Transferred with License Plates?

If it is a personal second-hand car, it cannot be transferred with the license plate. Below is relevant information about second-hand cars: 1. What is the original car invoice: The original car invoice refers to the invoice issued when purchasing a new car. When the purchased second-hand car is a personal first-hand car, the invoice required for the transfer is either the original car invoice or the previous vehicle transfer invoice. 2. Notes on the original car invoice: When buying or selling a second-hand car, special attention should be paid to checking whether the name of the vehicle owner on the original car invoice matches that on the vehicle registration certificate. If they do not match, the car may be of unknown origin or the invoice may be problematic.
16
2
Share

What to Do If Geely's First Maintenance Exceeds Three Months?

If the time limit is exceeded, the cost of the vehicle's first maintenance will be borne by the owner. The 4S store's after-sales service will not perform the complimentary maintenance items, so it is essential to pay attention to the first maintenance time and mileage after purchasing the vehicle. After purchasing the vehicle, you can consult the staff at the 4S store. During the subsequent use of the vehicle, it is crucial to monitor the time and ensure that maintenance is done only in advance. If the mileage reaches 5,000 kilometers, you can still avoid bearing the first maintenance cost and enjoy the maintenance items. The time and mileage are determined by whichever comes first.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.