How to reset the tire pressure monitoring on the Changan CS35?

[LaSophia]

The method to reset the tire pressure monitoring on the Changan CS35: 1. Press the MENU button on the turn signal lever to switch the small screen on the dashboard to the vehicle information column; 2. Rotate the up and down selection buttons on the turn signal lever to find the tire pressure information column, then press and hold the SET/CLR function key until a message pops up on the small screen asking whether to perform tire pressure learning. At this point, rotate the up and down selection buttons to choose "Yes" and press the MENU button to confirm. The Changan CS35 is an SUV independently developed by Changan Automobile. Its front face design is highly impactful, with a large and refined front grille. The headlights feature a sharp design style, complemented by naturally smooth curved trim rings and barrel-style lens covers. The overall vehicle design is upright and powerful, with smooth, sharp, and clean lines.

[Faith]

I've been driving the Changan CS35 for three years, and resetting the tire pressure warning is quite simple. First, make sure all four tires are properly inflated, with the cold tire pressure between 2.3-2.5 bar. Then, power on the car without starting the engine, press and hold the tire pressure reset button with an exclamation mark on the left side of the steering wheel for about ten seconds. The yellow tire pressure warning light on the dashboard will flash three times and then turn off—done! If the warning light stays on after a false alarm reset, there's an 80% chance you've actually got a nail puncture. Remember to check your tire pressure yourself every month—it's much more reliable than waiting for the warning.