How to Reset the Tire Pressure Monitoring on a 2019 Sagitar?
3 Answers
The method to reset the tire pressure monitoring on a 2019 Sagitar is as follows: 1. Start the vehicle and power on the central control screen, then press the 'car' button; 2. Locate and select the 'Tire' option on the central control screen; 3. Press the 'set' button and confirm to proceed to the next step; 4. Select 'Tire Pressure Monitoring Initialization' to clear the tire pressure warning light. Taking the 2019 Sagitar Manual Fashion model as an example, it is a compact four-door five-seater sedan with the following dimensions: length 4753mm, width 1800mm, height 1462mm, wheelbase 2731mm, and a fuel tank capacity of 50 liters.
I remember driving a 2019 Sagitar, where the tire pressure warning light would come on and require manual reset each time. First, find a safe place to park, then use a tire pressure gauge to accurately measure the pressure of all four tires. The standard values are usually listed on a sticker inside the driver's door frame, typically around 2.5 bar. After topping up the air, don't rush off—turn the key to the ON position without starting the engine. Once the infotainment screen lights up, press the CAR button, navigate to the settings menu, find the tire option, select 'Store Tire Pressure,' and confirm. The warning light should then turn off, and driving will feel more stable. I've encountered situations where the light continued to flash after resetting—this is often due to dirty sensors or poor wiring connections, which need cleaning. Tire safety is no joke; incorrect tire pressure increases fuel consumption and wear. Always check before long trips to avoid breakdowns on the road.
Clearing the tire pressure monitoring on my 2019 Sagitar is pretty straightforward. First, park the car with the engine off and make sure the tire pressures are correctly adjusted before proceeding. Get in the car, turn the key to the position where the dashboard lights up (don't start the engine), then navigate to the settings icon on the center display, go to the tire section, and select 'store new tire pressure' to confirm the reset. After resetting, the warning light should disappear. If it doesn't respond, there might be a sensor issue—try driving a few kilometers to let the system auto-calibrate. I usually do this during seasonal changes since temperature fluctuations affect tire pressure. Timely reset helps avoid false alarms so I can drive more focused. It's recommended to manually check tire pressure with a gauge every month or two—better than waiting for the warning light to cause last-minute panic and trip delays. Safety first, after all.
