How to Reset the Tire Pressure Monitoring Light on Trumpchi Vehicles?
1 Answers
To reset the tire pressure monitoring light on a Trumpchi vehicle, follow these steps: Turn on the instrument panel power, then press and hold the reset button until the tire pressure warning light turns off. The tire pressure monitoring indicator is a yellow symbol featuring an irregular circle with no top seal, four small spikes at the bottom, and an exclamation mark inside. This light indicates abnormal tire pressure. Generally, there are three main reasons for abnormal tire pressure in Trumpchi vehicles: 1. Abnormal Tire Pressure: The system typically alerts when pressure is below 1.8 bar or above 3.0 bar. In such cases, inspect the tires and adjust the pressure accordingly. 2. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure monitoring system is not reset promptly, it continues to record the previous data, causing the indicator light to stay on. Simply perform a tire pressure reset to resolve this issue. 3. Damaged Tire Pressure Sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
