How to reset the tire pressure monitoring light on the 2018 Magotan?
3 Answers
The method to reset the tire pressure monitoring light on the 2018 Magotan is: Locate the set button on the car's central console instrument panel and perform a tire pressure reset. The 2018 Magotan measures 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm. It is equipped with a 7-speed dual-clutch transmission and has a top speed of 218 km/h. The 2018 Magotan is a mid-size sedan powered by a 1.4T turbocharged engine with a maximum torque of 250 Nm and a fuel tank capacity of 66L. The vehicle features a front MacPherson independent suspension, a rear multi-link independent suspension, and tire specifications of 215/60R16.
I remember when driving the 2018 Magotan, the tire pressure light came on several times, and I resolved it myself each time. First, find a flat place to park, and measure the pressure immediately without opening the car door. Use your own tire pressure gauge to check all four tires, including the spare. The standard pressure is marked on the door frame label, usually between 2.2 and 2.5 bar for the Magotan. If the pressure is too low, I use a portable air pump to inflate it to the correct value. Make sure all tires are consistent—if the difference is too large, the light won’t turn off. Second, reset the system: sit in the driver’s seat, turn the key to the ACC position (no need to start the engine), and the electronic system will power on. Then, on the dashboard, use the buttons on the right side of the steering wheel to enter the menu, scroll to the vehicle settings, find the tire pressure monitoring or TPMS option, and press the reset button to confirm. Wait a few seconds, and the light will go off. I check it regularly every six months when seasons change to avoid constant worry. If the light keeps coming on, the sensor might be faulty, and you should visit a professional shop to check it, to avoid wasting tire lifespan.
When the tire pressure monitoring light comes on, safety must always come first. I never ignore it while driving. If it lights up during a trip, I immediately slow down and pull over, turn on the hazard lights, and then inspect the tires. I use a tire pressure gauge to check each tire, including looking for leaks or punctures. Adjust the pressure to the recommended value—for the Magotan, the standard is around 2.3 bar, with the label located near the driver's door. Uneven tire pressure might prevent the light from turning off, so it's crucial to ensure all tires have the same pressure. After adjusting the pressure, resetting the system is straightforward: get in the car without starting the engine, turn the key to the first position to power up the dashboard, use the center console button to enter the settings menu, find the tire pressure reset option, and confirm. Stay calm throughout the process—no need to rush. If the light remains on after a successful reset, it could indicate a sensor malfunction or other issues. Taking the car to a repair shop for a thorough inspection can save a lot of hassle. For prevention, I make it a habit to check the tire pressure every time I refuel—it’s a simple practice that greatly enhances safety.