How to reset the tire pressure monitoring light on Baojun 730?
2 Answers
To reset the tire pressure monitoring light on Baojun 730: 1. Turn off the engine, wait for 1 to 2 minutes, then start the vehicle. After the vehicle runs stably, check the tire pressure value displayed on the dashboard; 2. Inflate or deflate the tires according to whether the tire pressure is insufficient or too high, adjusting until the tire pressure monitoring light turns off. The functions of the tire pressure monitoring light: 1. Alert the driver of unstable tire pressure to prevent accidents; 2. Maintain the tire pressure and temperature within the specified range, reduce tire damage, and extend tire life; 3. Improve driving stability and reduce wear on the suspension system. Reasons for the tire pressure monitoring light to illuminate: 1. Tire damage causing deviation in the tire pressure of all four tires; 2. High or low tire pressure causing deviation in the tire pressure of all four tires; 3. High tire temperature.
When the tire pressure monitoring light comes on in my Baojun 730, my first reaction is to check if the tire pressure meets the standard. After parking, I use a pressure gauge to measure each tire, including the spare. The standard for Baojun is between 2.3 and 2.5 bar. If the pressure is too low or high, I adjust it to the normal range. Then, I get in the car, press the brake, and turn on the ignition without starting the engine. I locate the menu button on the steering wheel, enter the vehicle settings, select the tire pressure reset option, and hold it for a few seconds to reset the system. After confirming the pressure is normal, the light usually goes off. If the light remains on, it might be a sensor or wiring issue. Don’t force it; for safety, drive to a 4S shop for diagnosis with specialized tools. Regularly check the pressure once a month to prevent issues, especially before winter or long trips, as uneven pressure accelerates tire wear and affects fuel consumption.
