How to reset the tire pressure monitoring light on a Great Wall H6?

[ArabellaLee]

Great Wall H6 tire pressure monitoring light reset method: Ensure the key is in the second position. Use the instrument information toggle button on the left side of the steering wheel to display the kilometer interface on the dashboard. Press the upward button on the left side of the steering wheel, and the dashboard will display RRFIACTIVEACTIVATE:R. Press the (R) button on the dashboard, and the display will show + and -. Press the + button on the right side of the steering wheel, wait for 10 seconds, then turn off the key. Restart the vehicle, and the tire pressure warning light will disappear.

[MadelynMarie]

I've driven my H6 for several years and have dealt with the tire pressure light coming on a few times. Usually, the light comes on due to insufficient tire pressure or a sensor false alarm. Don't rush to reset it—first, get out and check the pressure of all tires, inflate them to around 2.3 bar, and make sure there are no leaks or punctures. After that, get back in the car, turn on the power without starting the engine, use the buttons on the left side of the steering wheel to bring up the dashboard menu, find 'Vehicle Settings,' enter the tire monitoring option, and click the 'Reset' or 'Learn' button. Hold it for a few seconds, and the light will turn off. If there's no response, start the car and drive a short distance to try automatic calibration. If the light comes back on soon after resetting, it might be due to an aging sensor or a nearly depleted battery. It's recommended to visit a 4S shop for inspection—don't ignore potential safety issues. This method is simple, but remember that resetting is only a temporary fix for the root problem; regular maintenance is what really matters.

[McAbel]

As a car owner, I would emphasize safety first before resetting the TPMS light. When the light comes on, you must stop to check if the tires are normal. Use a portable gauge to measure the pressure and top up the air before proceeding. For the H6, the reset method depends on the model year. Older models require navigating to the 'Tire' menu under 'System' on the center screen to reset, while newer models may involve holding the OK button on the steering wheel. After a successful reset, drive for 5-10 minutes to allow the system to recalibrate. If the reset doesn't work, don't force it—it could be due to poor wiring contact or a faulty sensor, which is more common in winter. In such cases, it's best to visit a professional shop for inspection to save time and hassle. Remember, TPMS reset isn't a cure-all; regular tire maintenance and prevention are key.

[DeJeffrey]

Resetting the H6 tire pressure monitoring light is quite simple, and I often do it on my own car. First, ensure the tire pressure is normal, then power on the car with the key without starting the engine. Navigate to the vehicle information section on the center console, enter the tire pressure menu, and select the reset option. After confirmation, the light will turn off. For some models without this menu, start driving and hold the Mode button on the steering wheel for a few seconds. If the reset fails, the sensor might be damaged and need replacement, or the pressure might not be adjusted correctly. After resetting, drive at low speed for a while to assist calibration. The entire process should not exceed two minutes, and always remember that safety is the top priority.