How to reset the tire pressure light on Trumpchi GM6?
1 Answers
Tire pressure reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Standard tire pressure: The standard tire pressure for standard tires is 2.4-2.5 bar; for reinforced tires, it is 2.8-2.9 bar; the maximum pressure should not exceed 3.5 bar. Abnormal tire pressure is generally caused by the following three reasons: Abnormal tire pressure: Generally, the system will alert if the pressure is below 1.8 bar or above 3.0 bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to stay on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, the only solution is to replace it with a new component.
