How to reset the tire pressure light on the Volkswagen New Sagitar?

Why Does the Car Steering Wheel Shake?

Here are the reasons why a car steering wheel shakes: 1. Toe-in: Due to collisions during driving, the steering tie rod and steering cross rod may deform, various ball joints may wear out and become loose, or tire wear may become irregular, causing the toe-in to increase or decrease. 2. Wheel dynamic balance: After driving a certain mileage, the original wheel dynamic balance lead weights may be lost, or the wheel hub may deform, causing the front end to sway and the steering wheel to shake at high speeds. 3. Push rod: The looseness of the lateral push rod ball joint or the loosening of the support bracket can cause instability during driving. 4. Wheel hub bearing: The looseness of the wheel hub bearing and severe wear of the left and right steering knuckle ball joints can lead to inaccurate front wheel alignment. 5. Steering shock absorber: While driving, if the steering shock absorber is damaged and leaks oil, or if the front suspension spring is deformed, it can also affect the car's stability.

7

5

Share

How Many Chances Are There in One Driving Test for Subject 3?

There are two chances in total. Subject 3, also known as the road test, is part of the motor vehicle driver's license examination. It is the abbreviation for the road driving skills and safe civilized driving common sense test in the motor vehicle driver's examination. Below is more information about the Subject 3 test: 1. The content of the road driving skills test varies for different types of vehicles eligible for driving. Generally, it includes: preparation before getting on the car, starting, driving straight, shifting gears, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. 2. The safe civilized driving common sense test includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods in situations such as tire blowouts, and post-accident handling knowledge.

9

1

Share

What are the starting steps for a Toyota Camry?

Toyota Camry starting steps: First, press the start button once, and after the ACC light comes on, press the start button again. At this point, the one-touch start button turns green, and the vehicle performs a self-check. Once the vehicle completes the self-check, press the brake pedal and press the one-touch start button once more to start the vehicle. Notes on using the one-touch start feature in the Toyota Camry: 1. Turning off/starting the engine while driving (1) Turning off the engine while driving: In case of an emergency while the vehicle is in motion, you can turn off the engine by pressing the engine start/stop button for more than 3 seconds or pressing it three times consecutively. The power will then switch to ACC mode. (2) Starting the engine while driving: If the engine stalls while the vehicle is in motion, you can restart the engine without pressing the brake pedal by shifting the gear lever to the N (neutral) position and pressing the engine start/stop button. 2. Low battery or malfunction of the smart key If the smart key battery is low or the smart key is not functioning properly, replace the battery promptly. If you need to use the vehicle, you can open the door with the mechanical key and insert the smart key into the smart key lock cylinder to start the engine.

19

3

Share

What are the precautions for the break-in period of an automatic transmission car?

Here are the precautions for the break-in period of an automatic transmission car: 1. The first 500 kilometers are the initial break-in period, during which the speed should not be too fast, generally below 70-80 km/h, and the RPM should not exceed 2,200. 2. From 500 to 1,000 kilometers is the mid-term break-in period, during which the maximum speed can be appropriately increased, generally up to 90-100 km/h, with the RPM still kept below 2,500. Increasing speed appropriately will not affect the engine but can promote the break-in process and help identify any abnormalities during acceleration. 3. From 1,000 to 1,500 kilometers is the late break-in period, during which the speed can be increased to below 120 km/h. Since the break-in is a gradual process, it must be done step by step. The RPM should not exceed 3,000. 4. All cars bear a heavier load at low speeds than at medium speeds, so the break-in period should not be prolonged at speeds below 60 km/h. The speed must be gradually increased. Additionally, if the break-in period is completed at a constant speed of 80 km/h, suddenly increasing the speed afterward may cause the new car to struggle to adapt. Therefore, the maximum speed during the break-in period should be increased progressively. 5. During the break-in period, avoid driving at a fixed speed for extended periods; vary the speed. 6. Avoid sudden braking and rapid acceleration during the break-in period.

16

1

Share

What Causes the Plastic Friction Sound in the Steering Wheel?

Here are the reasons for the plastic friction sound in the steering wheel: 1. Friction between plastic parts. Most components of the steering wheel are made of plastic, which hardens in cold weather, leading to squeaky friction sounds when they come into contact. 2. Issue with the steering wheel airbag clock spring. This sound usually comes from inside the steering wheel. Solution: Apply some grease to the airbag clock spring. If the sound persists after greasing, the clock spring needs to be replaced. 3. Aging of the tie rod end ball joint. Besides causing noise, it can also lead to vibrations. Solution: Replace the tie rod end ball joint. Note that a wheel alignment is required after replacement. 4. Loose or damaged stabilizer bar. If this component is faulty, the noise will not only occur when turning the steering wheel but also on rough roads. Solution: Add shims or replace the stabilizer bar. 5. Problem with the shock absorber top mount bearing. Lack of lubrication in the shock absorber top mount bearing can also cause noise. Inspection method: Open the hood and listen if the noise comes from the shock absorber top mount. Solution: Apply grease to the shock absorber top mount bearing. If ineffective, replace the component. 6. Improper tension or aging of the power steering belt. Solution: Adjust the belt tension or replace the belt.

18

4

Share

What is the process from purchasing a car to getting it licensed?

Below is the process of purchasing a car and getting it licensed: 1. Register and inspect the vehicle at the DMV: After completing the necessary procedures, go to the DMV to apply for a license plate. First, a specialized traffic police officer will inspect the vehicle, mainly checking the vehicle identification code, exterior appearance, and warning triangle sign. Prepare these in advance. 2. Choose a license plate number: After the inspection, you can go to the DMV hall to select a license plate number. Generally, there are two options: self-selection or random selection. 3. Pay the fee and wait for the license plate: After selecting the number, pay the fee and wait for the license plate. It usually takes three to five working days to receive it. 4. Before processing, you need to obtain the vehicle's certificate of conformity, the triplicate purchase invoice, pay the vehicle purchase tax, receive the original and duplicate tax certificates, prepare the original and photocopy of your ID card, and provide the original and photocopy of your temporary residence permit if you are not a local resident.

19

5

Share

How to reset the tire pressure light on the Volkswagen New Sagitar?

Why Does the Car Steering Wheel Shake?

How Many Chances Are There in One Driving Test for Subject 3?

What are the starting steps for a Toyota Camry?

What are the precautions for the break-in period of an automatic transmission car?

What Causes the Plastic Friction Sound in the Steering Wheel?

What is the process from purchasing a car to getting it licensed?

How many versions of the Avalon are there?

What Causes Tire Pressure Loss?

What does crv240turbo mean?

How Many Generations Does the Magotan Have Now?