How to reset the tire pressure light on the Vezel?

[DiDaisy]

After the tire pressure indicator light comes on, you must ensure that the car is parked safely by the roadside. First, check the tire pressure monitoring function on the car's navigation screen for any abnormal wheel conditions. You must check the tire pressure levels of the wheels. If the alarm is triggered due to excessive tire pressure, you can slightly increase the tire pressure to a safe value. There is a tire pressure symbol; press the confirm button to reset it. If it shows that the tire pressure is too low, you need to reset it and then drive the car for a while. The tire pressure alarm will then be cleared.

[SanLandon]

I've been driving a Vezel, and the tire pressure light coming on is quite common. Don't panic first, find a safe place to pull over because abnormal tire pressure can affect driving safety and fuel consumption. Check if the pressure in all tires is at the standard value; the recommended pressure for the Vezel is usually on the label at the edge of the driver's door, approximately 230 kPa for the front tires and 230 kPa for the rear tires. If the pressure is low, I just use a pump to add air; if it's high, I let some air out. After adjusting, the location of the tire pressure reset button varies—older Vezel models have it near the dashboard on the left side of the steering wheel, while newer models might have it on the center console screen, where you need to hold the SET button for a few seconds until the light goes off. After resetting, drive a short distance to test if the light stays off. If the light keeps coming on, the sensor might be faulty, and you'll need to visit a Honda 4S shop for a check-up. Make it a habit to check the tire pressure every month, and adding tire pressure monitoring caps can make things easier. This way, you can quickly handle it when the light comes on.

[TimothyFitz]

My car has been running for over ten years, and the tire pressure light has come on several times. I believe the first step is to check the tire pressure instead of hastily resetting it to avoid overlooking any issues. Use a portable pressure gauge to measure the pressure and adjust it by inflating or deflating according to the standard parameters. For the Honda Vezel (HR-V), the reset button is usually located in the glove box or on the right side of the steering wheel—check the manual for the exact position. Hold it down for 5-10 seconds to turn off the light. After resetting, drive a few kilometers at low speed for the system to adapt—this is based on my experience. If the light remains on, consider whether there might be a leak or a sensor malfunction, and visit a repair shop as soon as possible. Safety is crucial; incorrect tire pressure can cause rapid tire wear. I always recommend my friends to use a digital tire pressure monitor to prevent minor issues in advance.

[VanessaRose]

Simple Solution for Vezel Tire Pressure Light On, Don't Panic. First, I directly check if there's obvious air leakage or flat tires. If the pressure is incorrect, find a gas station to adjust it. The reset button is located in the steering wheel area, usually a small dot labeled SET—press it to reset. After driving for a minute, the light should go off. If it doesn't work, the setting might be invalid; try restarting the ignition. For safety, monitor it for a few days after resetting. If the light frequently comes on, promptly visit a professional shop to check the sensor. Regularly measuring the tire pressure yourself can prevent issues.