How to reset the tire pressure light on the Lavida?
3 Answers
Method to reset the tire pressure light on the Lavida: 1. Restore tire pressure: First, you need to restore the tire pressure to the normal value. After restoring to the normal value; 2. Press and hold the tire pressure monitoring button: Press the tire pressure monitoring button on the right side of the gear lever and hold it for about five seconds to reset the tire pressure light. If the tire pressure light comes on, be sure to check the condition of the tires. Reasons why the tire pressure warning light may come on: 1. The tire inflation pressure is too low; 2. The structure of the tire is damaged; 3. The vehicle is loaded on one side; 4. The wheels on the axle are overloaded.
When I noticed the tire pressure warning light on my Lavida was illuminated, I learned that the reset procedure requires first ensuring the tire pressure is normal, otherwise the issue will simply recur. The standard tire pressure values for the Lavida are usually marked on the driver's side door frame, typically around 2.2-2.5 bar. First, use a tire pressure gauge to check if all tires are properly inflated. If any tire is underinflated or leaking, immediately repair or inflate it. Next, start the vehicle's engine and locate the vehicle settings menu on the dashboard or center console—most Volkswagen models use steering wheel buttons for this, such as pressing the CAR button or selecting the function button to the right. After entering the system, find the Tire Pressure Monitoring System (TPMS) option, then click the reset or save button. The system will confirm a successful reset. After resetting, drive for 10-20 minutes to allow the system to recalibrate the tire pressure sensors, at which point the light should turn off. If the light remains on, it could indicate a sensor malfunction or slow leak, so it’s advisable to visit a professional repair shop promptly, as low tire pressure can affect braking performance and fuel efficiency, increasing safety risks. Developing a habit of checking tire pressure monthly can help prevent such issues from occurring frequently.
As a car owner with considerable experience in handling the Lavida tire pressure light reset, the key is to follow the steps carefully after confirming the tire pressure. The recommended tire pressure values are indicated on the label by the door. After inflating the tires, start the car. Use the control buttons on the steering wheel to navigate to the settings menu, select the tire pressure option under vehicle status, and confirm the reset. After resetting, drive a few kilometers and the light should turn off. If the light remains on, it may indicate unstable tire pressure or a sensor issue—don’t hesitate to visit a 4S shop for inspection. Regularly checking tire pressure during car washes can prevent problems, saving money and ensuring safety. Additionally, avoid high-speed driving when the tire pressure light is on, as it increases the risk of a blowout; low-speed driving during reset is more reliable. These simple steps ensure worry-free driving, and I find them quite beginner-friendly—just a few tries to master.
