How to reset the tire pressure light on the Chery Ant?

1 Answers
MacAlaina
07/30/25 5:07am
The method to reset the tire pressure light on the Chery Ant is: 1. Press the brake pedal; 2. Press the one-touch start button; 3. The car's dashboard will light up, and the vehicle's power will be turned on; 4. Inflate all four tires to the standard pressure; 5. Press and hold the tire pressure reset button inside the car for more than 3 seconds. Taking the Chery Ant 2021 Modified 150,000 Ant Fans Edition Iron Phosphate Lithium as an example: The manufacturer of this car is Chery New Energy, classified as a microcar, with an energy type of pure electric, transmission as a single-speed electric vehicle transmission, and body type as a 3-door, 4-seat hatchback.
Was this review help?
15
2
Share
More Forum Discussions

Are Car Key Batteries Universal?

Car key batteries are not universal. Each battery has a different model number, and there are approximately ten types of car key batteries. More information about car key batteries is as follows: 1. The model numbers commonly found on car key batteries include 2032, 2025, 2016, 1632, 1620, and 1616, among others. 2. Generally, car key batteries are button cells, which have a relatively long lifespan. Typically, these batteries can last for more than three years. If you include the spare key, many car owners may not even use up the battery before changing their cars.
5
2
Share

What should I pay attention to when buying a used truck?

When purchasing a used truck, the following points should be noted: 1. Body section: Pay special attention to rust conditions on various external parts. Lack of maintenance often leads to rust formation. Observe color discrepancies in repainted areas and paint residue near rubber seals. Vehicles with low mileage and very fresh paint may have been involved in accidents or undergone major repairs. Checking for welding marks on the truck can reveal if it has been in accidents or extensively repaired. 2. Engine section: The engine should be clean, start quickly, and idle smoothly without any shaking. 3. Transmission section: Engage a gear, pull the handbrake, and then release the clutch. If the engine doesn't stall, it indicates severe clutch slippage and wear.
16
2
Share

What is a Compactor Truck?

Compactor truck is a type of refuse compactor vehicle. Below is more relevant information: 1. Introduction to Compactor Trucks: A compactor truck consists of a sealed garbage compartment, hydraulic system, and operating system. The entire vehicle is fully sealed, capable of self-compacting and self-dumping, with all wastewater generated during compression entering a dedicated sewage tank. This design effectively addresses the issue of secondary pollution during waste transportation, eliminating inconvenience to the public. Key components utilize imported parts, featuring advantages such as high pressure, excellent sealing, convenient operation, and safety. Optional rear bin tipper mechanism or waste bucket tipper mechanism can be equipped. 2. Features of Compactor Trucks: (1) Simplified collection method, transforming the messy appearance of urban streets lined with trash bins and preventing secondary pollution. (2) High compression ratio and large loading capacity, with maximum crushing pressure reaching 12 tons. The loading capacity is equivalent to two and a half times that of non-compacting waste trucks of the same tonnage. (3) Automated operation, employing a computer control system where all filling and discharging operations can be performed by a single driver. It offers two operation modes: full automatic and semi-automatic, not only reducing the labor intensity of sanitation workers but also significantly improving the working environment.
5
2
Share

Can the vehicle body sweep the line during a right-angle turn?

No, the vehicle must not sweep the line. Control the speed properly, align the right quarter of the front of the car with the right white line to enter the right-angle turn, then observe when the upper edge of the left front door handle coincides with the left white line of the right-angle bay and turn the steering wheel fully. Straighten the steering wheel when the car is aligned, ensuring the steering speed matches the vehicle speed. Tips for right-angle turns are as follows: 1. Tip one: Pass in first gear without accelerating, stay as close as possible to the right curb when entering the test area, and turn the steering wheel sharply to the left when the front curb is obscured by the hood until fully turned, then quickly straighten the wheel when the front of the car is aligned with the exit. 2. Tip two: Before entering the right-angle turn, drive slowly as far as possible from the turning point marker within the road lines. When the center of the small triangular window on the front window of the side near the turning point aligns with the turning point, turn the steering wheel fully to that side, then straighten the wheel when the front of the car is aligned. 3. Tip three: Drive with the right side of the car close to the outer right-angle line, and when the middle of the triangular windows on the left and right front doors aligns with the inner and outer right-angle lines, turn the steering wheel fully to the left or right, then straighten it when the car is aligned.
14
4
Share

How to reset the oil change reminder on a 2013 Ford Kuga?

Turn the key to the ON position without starting the engine. Simultaneously press and hold the brake and accelerator pedals. At this point, a series of English prompts will appear on the instrument cluster. Continue holding the accelerator and brake pedals until the English prompt flashes once, indicating that the maintenance reset is successful. You can then release the accelerator and brake pedals. Related details are as follows: 1. Ford Kuga: The Ford Kuga is an SUV under the Ford brand. On April 22, 2012, the all-new Ford Kuga made its Asian debut at the 2012 Beijing International Auto Show. Dubbed by Ford as the "smarter SUV," it features a luxurious and stylish exterior, a highly modern interior, and numerous leading high-tech configurations in its class. 2. Optimizations: The Ford Kuga inherits the deep expertise of over half a century of Ford SUV family development, design, manufacturing, and tuning. Building on this foundation, the Kuga has undergone comprehensive evolution, with a series of upgrades to its exterior and interior. The overall design is more sporty and fashionable, and the center console now includes a 10-inch LCD screen paired with a new internet-connected car intelligent system. The optimized rear seating space improves knee room for rear passengers, further enhancing ride comfort.
4
0
Share

How to Use a Reversing Radar?

To use a reversing radar, you need to start the engine and power up the vehicle's electronic systems. The specific steps for using a reversing radar are as follows: 1. Open the driver's side door of the car. 2. Press down on the car's brake pedal to prepare for starting the engine. 3. Turn the car's key to start the engine and let it idle. 4. The car's dashboard will light up, indicating that the vehicle's power is fully connected. 5. Press the reversing radar activation button located on the left side of the center console's combination switch. 6. Press the reversing radar activation button to turn on the reversing radar system.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.