How to reset the tire pressure light on the 2020 Lavida?
3 Answers
2020 Lavida tire pressure light reset method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button. After hearing a "dong" sound, release the button. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. Precautions for tire inflation: Always use a pressure gauge to check the pressure to avoid overinflation, which can cause tire blowout. After stopping the vehicle, wait for the tires to cool down before inflating, as tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and core are not properly aligned, have protrusions, depressions, or other defects, it will be difficult to inflate and measure the pressure. Pay attention to cleanliness during inflation. The air being pumped in should not contain moisture or oil, as this can deteriorate and damage the inner tube rubber. Do not exceed the standard pressure too much during inflation and then release air, nor should you overinflate because you haven't been able to inflate for a long time while traveling. Exceeding the standard pressure too much can cause excessive extension of the cord, reducing its strength and affecting the tire's lifespan.
I remember last time when the tire pressure warning light came on in my 2020 Lavida, it was because the tire pressure was a bit low, triggering the system warning light. To reset it, first check the pressure of all tires, including the spare, ensuring they are inflated to the standard value indicated on the door frame label (usually around 230kpa). Then, sit in the driver's seat, start the engine, use the button on the right side of the steering wheel to scroll to the 'Settings' option in the dashboard menu, select 'Vehicle' settings, then enter the 'Tire Pressure Monitoring' section, choose 'Reset' or 'Confirm New Pressure,' press the confirm button and wait a few seconds for the light to turn off. The whole process takes about one or two minutes. However, if the light still doesn’t go off, it might be a sensor or wiring issue, requiring a professional inspection. I’ve found that regularly checking tire pressure not only avoids such troubles but also saves fuel and extends tire life. Using a simple tire pressure gauge once a month is easy and practical, preventing panic when the light comes on and affecting driving mood.
As someone who drives a lot, I've developed the habit of always paying attention to the tire pressure warning light. If the light comes on in a 2020 Lavida, it's best to pull over first and check if the tire pressure is normal. If no leaks or obvious issues are found, you should reset the light to prevent false alarms. The steps are simple: after starting the engine, use the multifunction buttons on the steering wheel to access the dashboard information, find the vehicle settings menu, scroll to the tire pressure system section, and click the reset button to confirm the pressure has been adjusted—the light will then turn off. Never ignore it, as driving at high speeds with low pressure could lead to a tire blowout and an accident. From my experience, if the light stays on after resetting, head straight to the dealership to check the sensors—they can resolve it with diagnostic tools. By the way, maintaining proper tire pressure greatly benefits handling and fuel efficiency, especially making the ride much steadier at high speeds.
