How to reset the tire pressure light on the 2019 Sportage?

1 Answers
ElijahAnn
07/29/25 9:38pm
The method to reset the tire pressure light on the 2019 Sportage: First, adjust the tire pressure and turn on the ignition switch. Then press the menu button on the left side of the steering wheel to select the mileage interface, followed by pressing the reset button on the instrument panel and the plus button on the right side of the steering wheel. After 10 seconds, turn off the key and restart the car. The 2019 Sportage has a body length of 4460mm, a width of 1850mm, a height of 1695mm, and a wheelbase of 2640mm. It is equipped with a 2.0L and a 1.4T engine. The 2.0L engine has a maximum power of 161 kW and a maximum torque of 193 Nm, while the 1.4T engine has a maximum power of 140 kW and a maximum torque of 242 Nm.
Was this review help?
14
4
Share
More Forum Discussions

How to Quickly and Easily Identify a Flood-Damaged Car?

Simple and quick methods to identify a flood-damaged car are: 1. Open the hood and check if there is mud residue on the radiator, air conditioning heat sink, or the front panel of the radiator; 2. Inspect small components near the engine, such as the charging motor, starter motor, wire sockets, and the seams around the wheel wells for mud; 3. Check the springs and inner fabric of the front and rear seats for mud residue and a musty smell; 4. Examine the hidden seams around the rear wheel wells in the trunk for mud residue. The effects of a car being flooded include: 1. The inner door panels, air conditioning ducts, crankcase, and exhaust vents in the differential may become moldy and corroded; 2. The seats and headliner fabric may retain stubborn stains and develop mold; 3. The lubricating grease in the wheel bearings and half-shafts may degrade and deteriorate after being soaked.
18
3
Share

What engine is used in the Great Wall Haval H6?

Haval H6 uses a domestic engine, a turbocharged engine provided by Shenyang Aerospace Mitsubishi. The engine models and specifications used in Haval H6 are: GW4G15B, 1.5T version engine, with a maximum power of 124kW and maximum torque of 285Nm; 2.0T version engine, with a maximum power of 169kW and maximum torque of 385Nm. For daily maintenance of Haval H6's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected based on mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil volume moderate. When engine oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to pass through the bypass valve and bringing dirt back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal powder from part wear to form sludge. When the amount is small, it suspends in the oil; when large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
6
2
Share

What engine does the Jatu im6 use?

Jatu im6 is equipped with a naturally aspirated engine, model DAM15D, with a maximum torque of 150 Nm and a maximum horsepower of 116Ps. Jatu im6 is a domestic MPV-type civilian vehicle produced by BAIC, a model in the Foton series, using a 1.5L displacement engine, an aluminum engine, and the brand is Mitsubishi. The engine of Jatu im6 can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil quantity should be moderate; When the oil passes through the fine holes of the filter, the solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve, still bringing the dirt back to the lubrication part, causing engine wear and intensifying internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear.; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale can not only ensure the normal operation of the engine but also extend the overall life of the radiator and the engine.
20
4
Share

Where is the rearview mirror heating switch for the 3rd generation Haval H6?

The rearview mirror heating switch for the Haval H6 is located among a row of buttons below the central control screen, featuring an icon of a small square with three arrows. Press the button until the light turns on to activate it. The rearview mirror heating function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the mirror surface, gradually removing rain or fog, eliminating the need for the driver to manually wipe the mirrors frequently, thus reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. There's no need to manually adjust the angle, as the driver's side has an adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually disappears, effectively defogging and deicing the mirror. However, if the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the car is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery, which could leave insufficient power to start the car. Other methods for defogging rearview mirrors include: Opening windows for airflow: Crack open both side windows slightly to allow air convection between the inside and outside of the car. This reduces the temperature difference, causing the fog to gradually disappear. Adjusting the car's air conditioning to the appropriate setting can also help by blowing warm air to defog the mirrors.
5
2
Share

Where is the engine number located on the JAC Refine M3?

The engine number of the JAC Refine M3 is located on the engine block, while the vehicle identification number (VIN) is situated on the front half of the chassis. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following four ways: The vehicle's driving license displays the engine number, usually found on the second-to-last line; The motor vehicle registration certificate records the engine number; The car purchase invoice includes the engine number; The vehicle purchase tax payment certificate also states the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be identical. On the other hand, the engine number is the production serial number of the engine. Each engine can only have one engine number, and every engine's number is unique.
20
5
Share

How to Solve Scooter Starting Shaking and Jerking?

There are corresponding solutions for different causes of shaking during scooter starting. Below are the specific solutions: 1. The contact area between the friction plate and the working surface of the clutch housing is too small: Apply chalk to the surface of the friction plate of the clutch shoe, install the clutch, start the engine, and accelerate-brake to stop the rear wheel. Repeat this several times, then remove the clutch to check the working contact surface of the shoe friction plate. Use a grinding wheel to polish the surface of the clutch shoe friction plate, ensuring the contact area between the friction plate and the working surface of the clutch housing reaches more than 80% of the total area. 2. Excessive wear of the clutch friction plate: Use a file to trim the chamfers at both ends of the clutch friction plate to increase the chamfer that has been reduced due to wear. 3. Sticking of the clutch shoe on the pin: Clean and lubricate the installation pin of the clutch shoe (i.e., the transmission plate pin) and the pin hole on the clutch shoe to eliminate the sticking of the clutch shoe on the pin. 4. Damage to the small spring of the clutch shoe: Replace the three small tension springs of the clutch shoe to ensure equal tension in all three small springs, thereby eliminating the asynchronous engagement of the clutch friction plate and the clutch housing.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.