How to reset the tire pressure light on the 2018 Magotan?

1 Answers
LeTyler
07/30/25 1:38am
Methods to reset the tire pressure light on the 2018 Magotan: 1. Start the car and locate the home button on the central display screen, then find the settings. After selecting the vehicle, the tire pressure monitoring system calibration will appear. Choose calibration to reset the tire pressure warning light; 2. During the car's startup, all warning lights on the dashboard will illuminate as the car performs a self-check. Once the self-check is complete, the warning lights will turn off. If the warning light remains on, it may indicate a fault that requires immediate inspection; 3. If the tire pressure warning light stays on, it suggests an issue with the car's tire pressure. If the warning message persists after calibration, it is recommended to check the tire pressure and perform the calibration again. If the issue cannot be resolved, take the car to a 4S shop for maintenance and inspection. The dimensions of the 2018 Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm.
Was this review help?
19
3
Share
More Forum Discussions

Where is the air filter of Trumpchi GS4 located?

The air filter of Trumpchi GS4 is located on the passenger side, beneath the glove compartment, near the center console. Here is more information about the Trumpchi GS4: 1. The Trumpchi GS4 continues the family design style, with a softer overall shape, making the body proportions and detail design very pleasing to the eye. 2. The Trumpchi GS4 features top and sub-top configurations with black and brown interiors. 3. The Trumpchi GS4 is equipped with two 12.3-inch LCD screens on the center console. Besides mainstream configurations, it is the world's first mass-produced vehicle equipped with in-car WeChat. 4. The new Trumpchi GS4 comes with the ADiGO driving assistance system, achieving L2-level autonomous driving functions. 5. The engine has a maximum power of 124kW (169Ps) and a maximum torque of 265Nm/1700-4000rpm. The Trumpchi GS4 is equipped with a 1.5TGDI engine, paired with a 6MT or 6AT transmission.
5
3
Share

What brand is the engine of the JAC Refine S4?

Refine S4's engine is independently developed by JAC Motors and produced in JAC's engine manufacturing plant. This vehicle is equipped with the following two engines: 1. The 1.5-liter turbocharged engine, codenamed HFC4GC2.4D, has a maximum power of 110 kW, a maximum torque of 210 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 2000 to 4500 rpm. This engine features i-VVT technology, uses multi-point fuel injection, and has an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission. 2. The 1.6-liter naturally aspirated engine, codenamed HFC4GB3-3D, has a maximum power of 88 kW, a maximum torque of 150 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed range of 3500 to 4500 rpm. This engine features DVVT technology, uses multi-point fuel injection, and has an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a CVT transmission.
20
4
Share

What engine is used in the new Z4?

The new Z4 is equipped with two types of engines: one is a 2.0-liter turbocharged engine, and the other is a 3.0-liter inline six-cylinder turbocharged engine. The relevant details are as follows: 1. The 2.0-liter turbocharged engine has a maximum power of 145 kilowatts and a maximum torque of 320 Newton-meters. It can deliver maximum torque at 1450-4200 revolutions per minute, with a maximum power output at 4500-6500 revolutions per minute. This engine is paired with an 8-speed automatic transmission (8AT). 2. The 3.0-liter inline six-cylinder turbocharged engine has a maximum power of 250 kilowatts and a maximum torque of 500 Newton-meters. It can deliver maximum torque at 1600-4500 revolutions per minute, with a maximum power output at 5000-6500 revolutions per minute. This engine is also paired with an 8-speed automatic transmission (8AT).
3
1
Share

How to Rematch the Tire Pressure Monitoring System for the 2017 Haval H6?

Turn on the vehicle's ignition switch. Select the tire pressure display bar by rotating the lever on the left side of the steering wheel. Press and hold the setcrl button on the left lever for 2 to 3 seconds to complete the rematching of the tire pressure monitoring system.
12
3
Share

How Does Cruise Control Work?

Cruise control system working principle: Simply put, it involves the cruise control module reading the pulse signal from the vehicle speed sensor and comparing it with the set speed, then issuing commands to the servo mechanism to adjust the throttle opening, either increasing or decreasing it, to maintain the vehicle at the preset speed. Here are some related details: 1. The electronic multifunction cruise control system eliminates the mechanical control part of the cable-type cruise control, adopting precise electronic control instead, which makes control more accurate and avoids the risk of mechanical failure. 2. The working principle of the cable-type cruise control system, simply put, involves the cruise control module reading the pulse signal from the vehicle speed sensor and comparing it with the set speed, then adjusting the throttle opening, either increasing or decreasing it, to maintain the vehicle at the preset speed. For example, when the vehicle is going uphill and the speed decreases, the pulse signal from the speed sensor drops, and the control module will command the servo actuator to open the throttle at a corresponding angle to maintain the speed. Conversely, when going downhill, it will reduce the throttle opening.
5
4
Share

Why is the steering wheel not straight when the car drives straight?

The reasons for the steering wheel not being straight when driving straight are as follows: 1. Wear and looseness of the steering tie rod ball joint pin, or loose fastening nuts. 2. Severe wear of the steering knuckle kingpin and bushing, leading to increased clearance. 3. Excessive axial clearance of the front wheel hub bearings or wear. Here is additional information about the steering wheel not being straight when driving straight: 1. Check if the tire pressure is too high on one side or too low on the other, and inspect the tires for any issues, such as whether the tread patterns are consistent and the tread depth is uniform. 2. Check if the steering wheel is properly centered. During use, situations like sharp turns can cause the steering wheel to not return to the correct position. Sometimes it may look normal visually, but it is not. The steering wheel return can be repaired.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.