How to reset the tire pressure light on SAIC Roewe RX5?

Can you make a U-turn when the left turn signal is on?

You can make a U-turn when the left turn signal is on. Vehicles are allowed to make a U-turn at intersections where left turns are permitted and there are no signs or markings prohibiting U-turns. Precautions for making a U-turn during a left turn are as follows: Vehicles should proceed according to the left turn lane signal without affecting the normal movement of other vehicles. If making a U-turn at an intersection with a left turn waiting area, you can first enter the left turn waiting area when the straight signal is green and wait until the left turn signal turns green to make the U-turn. Other situations where U-turns are allowed are as follows: Presence of a U-turn signal or sign: When there is a U-turn signal at an intersection, you can make a U-turn when the U-turn signal is green. If there is a U-turn sign or marking on the lane, you can make a U-turn as long as it is safe for yourself and others. U-turns are allowed at dashed lines: Whether it is a white or yellow dashed line, U-turns are permitted. For double yellow lines with one solid and one dashed, check if your side is the dashed line. If it is, you can make a U-turn safely; if it is a solid line, U-turns are not allowed. If you encounter double yellow lines at an intersection, you can make a U-turn on the dashed line side but must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid areas, but as long as there is no central barrier, you can make a U-turn here after yielding to normally moving vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side can make a U-turn from there. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the pedestrian crossing, and then make a U-turn. It is prohibited to make a U-turn by crossing the solid line or the pedestrian crossing.

13

5

Share

What can be used to remove adhesive from a car?

Adhesive on a car can be removed using products like essential balm or alcohol. Methods to remove adhesive from a car: Wipe with a damp cloth; spray and wash with a specialized adhesive remover; clean with foam cleaner; wipe with vinegar, then scrape off after the vinegar dissolves the adhesive; apply essential balm; use alcohol; or remove with car heat insulation cleaner. Functions of car film: Blocks heat generated by infrared rays; filters ultraviolet rays to protect skin; provides safety and anti-burst features, as the base layer is polyester film with strong tear and puncture resistance; maintains privacy and security; reduces air conditioning load; and minimizes accidents caused by glare.

3

Share

How to Determine Whether Car Engine Oil Should Be Changed

The methods to determine whether car engine oil needs to be changed are as follows: 1. Prepare a blank test paper, then take out the used oil from the car engine and drop it onto the blank oil paper. 2. Observe the changes of the oil on the test paper. If the oil shows stratification, divided into three layers in total: the outermost layer is the diffusion layer, the middle layer is the oil ring, and the innermost black substance is the oil deposit, then the car's oil needs to be changed. 3. If the oil dropped on the test paper shows unclear stratification, with only two layers and no obvious black deposits in the middle, then the car oil can still be used. 4. Generally, new oil will not stratify, and when dropped on the test paper, it appears very clear and bright, proving that the purchased oil is brand new and unused.

1

2

Share

Where is the Hanteng X7 air conditioning filter located?

Hanteng X7 air conditioning filter is located inside the glove compartment in front of the front passenger seat, which can be seen upon opening. The replacement cycle for the air conditioning filter is every 10,000 kilometers. If the airflow from the air conditioner significantly decreases, the air conditioning filter may be clogged. First, clean the filter, and replace it if necessary. The steps for replacing and cleaning the Hanteng X7 air filter are as follows: 1. Open the glove compartment and pull down the small hook on the right side. 2. Pinch both sides of the glove compartment and squeeze inward to remove it. 3. This is the air conditioning filter slot. Release the clips on both sides to pull it out. 4. Pull out the filter slot, install the new filter, and reinstall the glove compartment.

5

1

Share

Can Structural Adhesive Repair Rust Holes in Cars?

Structural adhesive cannot repair rust holes in cars. Methods for treating rust holes in cars: Use a grinding machine to sand off the paint on the rusted area of the car; weld a steel plate of appropriate size to the rusted hole; after welding, use the grinding machine to smooth the weld points; apply putty to the repaired area, wait for the putty to harden, and then sand the surface smooth; finally, spray paint on the repaired area. Introduction to structural adhesive: Structural adhesive refers to a high-strength adhesive that can withstand large loads, is resistant to aging, fatigue, and corrosion, and maintains stable performance over its expected lifespan. It is suitable for bonding structural components that bear strong forces. It can be used to bond metals, ceramics, plastics, rubber, wood, and other similar or dissimilar materials. It can replace traditional connection methods such as welding, riveting, and bolting. The stress distribution on the bonding surface is uniform, and it does not cause thermal effects or deformation on the parts.

3

Share

What is the Introduction to New Energy Vehicle Motors?

New energy vehicles use permanent magnet synchronous motors. Introduction to Permanent Magnet Synchronous Motors: Permanent magnet synchronous motors utilize permanent magnets to provide excitation, resulting in a relatively simple motor structure that reduces machining and assembly costs. They eliminate problematic slip rings and brushes, enhancing operational reliability. Since no excitation current is required, there is no excitation loss, improving motor efficiency and power density. The permanent magnet synchronous motor consists of components such as the stator, rotor, and end covers. The stator is fundamentally similar to that of conventional induction motors, employing a laminated structure to minimize iron losses during operation. The rotor can be solid or made of laminated sheets. The armature winding can use concentrated full-pitch windings, distributed short-pitch windings, or unconventional windings. Introduction to New Energy Vehicles: New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources, integrating advanced technologies in power control and driving systems to achieve advanced technical principles, new technologies, and novel structures. The promotion of new energy vehicles aims to address environmental protection and petroleum crisis concerns by reducing or abandoning traditional gasoline or diesel-powered internal combustion engines, which are currently mainstream models. New energy vehicles are categorized into four major types: hybrid electric vehicles, pure electric vehicles, fuel cell electric vehicles, and other new energy vehicles.

7

4

Share

How to reset the tire pressure light on SAIC Roewe RX5?

Can you make a U-turn when the left turn signal is on?

What can be used to remove adhesive from a car?

How to Determine Whether Car Engine Oil Should Be Changed

Where is the Hanteng X7 air conditioning filter located?

Can Structural Adhesive Repair Rust Holes in Cars?

What is the Introduction to New Energy Vehicle Motors?

What Causes a Dash Cam to Suddenly Display Color Stripes?

What Are the Causes of Electric Vehicle Battery Degradation?

How much gear oil should be added to an 800W electric tricycle?

What is the reason for the one-touch window lift malfunction after replacing the battery?