How to reset the tire pressure light on Roewe RX5?

What is the function of the automatic transmission handle button?

The function of the automatic transmission handle button is to prevent incorrect gear shifting. The benefits of preventing incorrect gear shifting include: 1. Protecting the transmission, preventing damage to transmission gears, and extending the lifespan of the transmission; 2. Eliminating potential safety hazards caused by misoperation. If the gear is shifted incorrectly, the vehicle may unexpectedly move forward or backward, which could lead to accidents. The button on the automatic transmission handle is called the lock button, also known as the gear lock. Situations where the automatic transmission handle button needs to be pressed: 1. When shifting into R (Reverse) gear; 2. When shifting out of P (Park) gear; 3. When shifting into P (Park) gear. In these three scenarios, the button must be pressed to shift gears. Gears that could potentially cause reverse impact to the transmission will be locked, and the lock button must be pressed to unlock during gear shifting. For example: shifting from R to P requires pressing the button; shifting from P to R requires pressing the button; shifting from R to D (Drive) does not require pressing the button; shifting from D to N (Neutral) does not require pressing the button.

20

5

Share

Why Can't the Brake Pedal Be Pressed Down During One-Key Start?

Here are the solutions for when the brake pedal can't be pressed down during one-key start: 1. First, it's important to understand that a car's braking system operates most effectively when the engine is running. The brake booster pump is the key component behind vehicle braking, amplifying the force applied to the pedal. When the engine is off, the brake booster pump stops functioning, and typically, pressing the brake pedal three times will deplete its stored energy. 2. If the brake pedal can't be pressed down, it's likely because the vacuum in the vacuum booster has been exhausted after pressing the pedal multiple times while the engine was off. Since the engine isn't running, the vacuum cannot be replenished. 3. If you encounter this issue, don't panic. Press the one-key start button to power on the vehicle, then apply more force to press the brake pedal—this usually unlocks it. Many car owners have experienced this situation. 4. If you haven't pressed the brake pedal unnecessarily after turning off the engine, the issue might lie with the brake pedal itself. In this case, it's advisable to visit a 4S shop for inspection and repair.

1

Share

How to Park an Automatic Transmission Car on a Slope

Parking method for automatic transmission cars on a slope: First pull the handbrake, step on the foot brake, shift the gear to N position and then to P position. When parking on a slope, pay attention to whether the vehicle may roll back to avoid losses. Parking on an uphill road: When parking on an uphill road, control the steering wheel properly to prevent the vehicle from rolling back during parking, which may compromise safety and cause economic losses. Precautions for starting on a slope: 1. Always apply throttle when starting on a slope. During daily practice, stalling may occur due to greater resistance on the slope and insufficient idle speed, making it difficult for the vehicle to start. If the vehicle stalls while starting on a slope, for manual transmission cars, first apply the brake, then depress the clutch, stop the vehicle completely, and restart. 2. Pay attention to clutch control when starting on a slope. Do not release the clutch too high. If the clutch is released too high without releasing the handbrake, the vehicle may also stall. The driver needs to control the clutch to maintain the vehicle's semi-engaged state by observing the engine speed and the shaking of the car's front, and lightly stepping on the accelerator to start successfully.

15

0

Share

How to Downshift in Automatic Transmission Manual Mode?

Methods for downshifting in automatic transmission manual mode: To downshift in manual mode, pull the gear lever toward the minus (-) direction; to upshift, pull it toward the plus (+) direction. When switching to manual mode, the car's dashboard will display a prompt. Generally, 1st gear is shown as D1, 2nd gear as D2, and so on. Some models display the manual mode as M gear, while others only show minus and plus signs. The manual mode can be switched at any time without restrictions like timing or RPM. The transmission will automatically match the appropriate gear based on the real-time vehicle speed. Manual mode is typically used in situations such as ascending or descending slopes, overtaking, starting on icy or snowy roads, or during traffic jams. For example, when descending a long slope in D gear, the car's speed will increase due to inertia, requiring the driver to constantly use the brakes to control speed. Frequent and prolonged brake usage may lead to reduced efficiency due to overheating, and in severe cases, brake failure. In such scenarios, it is safer to use manual mode to engage a lower gear, forcing the transmission to output lower RPMs and using the engine to control speed, supplemented by braking, for a more stable approach.

15

2

Share

Which car has a dragonfly logo?

The car with a dragonfly logo is the CH-Auto (Great Wall Huaguan) QianTu. The CH-Auto QianTu was officially launched at the Beijing Auto Show in April 2014. The new car features a sharp design with a low-slung body that creates a full-fledged sports car appearance. Additionally, its positioning as a pure electric sports car makes its identity quite unique. Additional information: 1. The electric vehicle launched by CH-Auto is named QianTu. 2. The car's dimensions are 4628×2064×1254mm, with a wheelbase of 2650mm. The front and rear tracks are 1780/1755mm respectively, featuring unequal wheelbases. 3. The vehicle body is constructed with a large number of aluminum components, and the surface is covered with carbon fiber materials. 4. The QianTu is equipped with a lithium-ion battery with a capacity of 42.1kWh. The vehicle adopts a front double-wishbone and rear double-wishbone suspension combination.

14

5

Share

Where is the air conditioning filter of Dongfeng Peugeot 207 located?

The air conditioning filter of Peugeot 207 is located on the right side of the engine, in front of the passenger seat. There is a large hole above the shock absorber, and you can see the air conditioning filter by squatting down. The car air conditioning filter uses high-efficiency adsorption material - activated carbon composite filter cloth combined with long-fiber non-woven fabric, which can effectively filter smoke odor, pollen, dust, harmful gases, and various odors. Here is some extended information: 1. Models: Dongfeng Peugeot 207 has both sedan and hatchback versions. The engine configurations for these two models are 16-valve 1.6L and 1.4L inline 4-cylinder gasoline engines. The 1.4L version only comes with a manual transmission, while the 1.6L version offers both manual and automatic transmissions. 2. Exterior: The front face of the Peugeot 207 incorporates a large number of family-style design elements, reflecting the French artistic aesthetic. 3. Interior: The interior design of the Peugeot 207 highlights a sporty style, with two color schemes available: light and dark. Chrome trim is inlaid on the air vents and gear shift, while aluminum pedals can greatly stimulate driving passion.

17

4

Share

How to reset the tire pressure light on Roewe RX5?

What is the function of the automatic transmission handle button?

Why Can't the Brake Pedal Be Pressed Down During One-Key Start?

How to Park an Automatic Transmission Car on a Slope

How to Downshift in Automatic Transmission Manual Mode?

Which car has a dragonfly logo?

Where is the air conditioning filter of Dongfeng Peugeot 207 located?

How to Drive an Automatic Transmission Car for Fuel Efficiency?

Can Dishwashing Detergent Be Used for Car Washing?

What Causes the Popping Sound from the Exhaust Pipe When Letting Off the Throttle?

Which gear is the forward gear in an automatic transmission car?