How to Reset the Tire Pressure Light on Baojun 730?
2 Answers
How to reset the tire pressure light on Baojun 730: First, drive the Baojun 730 to a safe area or garage to avoid any danger. Start the Baojun 730 vehicle, and the central control screen will turn on. Find the "Settings" button. Locate the "Tire" option highlighted in a red box on the central control screen and click to enter. Click the "SET" button highlighted in a red box to proceed to the next step. Click the "Confirm" button highlighted in a red box to proceed to the next step. What to do if tire pressure is insufficient: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system. If inspection reveals a puncture, drive to a tire repair shop promptly for patching and reinflation. If the tire pressure warning reappears some time after inflation without any puncture, it may be due to air leakage caused by a deformed wheel hub. It is recommended to inspect the wheel hub and replace it if necessary. There are generally three reasons for abnormal tire pressure: Tire pressure anomaly: The system will alert if the pressure is below 1.8 bar or above 3.0 bar. In this case, inspect the tire and adjust the pressure. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will still record the previous data, causing the tire pressure warning light to illuminate. Simply reset the tire pressure monitoring system. Tire pressure sensor damage: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving (e.g., by impact), the tire pressure warning light will turn on. In case of sensor damage, the only solution is to replace it with a new one.
When I encounter the tire pressure warning light, I usually first ensure all four tires are inflated to the standard pressure, then start the vehicle. Locate the small stick button on the left side of the steering wheel—that's for switching the dashboard menu—press and hold it to enter setup mode. Rotate the stick left or right to find the tire pressure reset option, then press and hold for a few seconds, and the tire pressure light will turn off. It's best to perform this operation while parked. For newer models with a central control screen, simply select the tire pressure calibration option in the settings menu. After resetting, it's advisable to drive a couple of kilometers to check. If the light remains on, there might be a leak, and the tire should be inspected. DIY reset is simple and cost-effective, but if you can't manage it, it's more reliable to visit a repair shop for a computer-assisted reset, as tire pressure is crucial for safety.
