How to reset the tire pressure light on a 2021 Corolla?
3 Answers
Power on the vehicle and reset the trip meter on the dashboard. Press the button on the dashboard to switch the display mode to show instant fuel consumption. Then hold down the right button without releasing. Long-press the mode switch button on the dashboard, turn the ignition switch to the NO position, and then release the mode switch button. Continue pressing the right button for more than three seconds. Simultaneously press the mode switch button and the time adjustment button on the dashboard. Immediately press and hold both the left and right buttons at the same time, then release both buttons within two seconds, and the wrench icon will disappear.
I previously drove a 2021 Corolla, and resetting the tire pressure light was quite easy. First, park the car and turn on the ignition without moving. Locate the menu button on the left side of the steering wheel and press it to display options on the dashboard. Scroll to find the vehicle settings, then select the tire pressure monitoring system. Press the reset or initialize button, and the system will begin calibration. Wait for it to complete, and the light will flash a few times before turning off. Remember to check beforehand that all tire pressures are around 2.3-2.5 bar—the standard values are displayed on a label on the door pillar. If the light remains on after resetting, there might be a leak or a sensor malfunction. I’ve done this myself several times without issues, but for safety, it’s reassuring to recheck the tire condition every few weeks. Driving with incorrect tire pressure is dangerous, so addressing it promptly saves hassle.
To reset the tire pressure light on a Corolla, the steps are straightforward. After starting the car and keeping it stationary, use the multifunction steering wheel buttons to enter the settings menu. Select the TPMS reset function in the maintenance options and confirm to begin. The system will automatically recheck the tire pressure. Note that the tires must be properly inflated during the operation; otherwise, the reset will be ineffective. Common issues like doors not being fully closed or the trunk not being locked can also trigger the light, so check these before resetting. After calibration, drive a short distance—if the light turns off, it indicates success. If the light stays on, it might mean a sensor is faulty and needs replacement at a repair shop. The tire pressure monitoring system safeguards driving safety, and resetting it is part of routine maintenance.