How to reset the tire pressure light on a 2020 Magotan?
4 Answers
2020 Magotan tire pressure light reset method is as follows: Use the buttons to operate. With the vehicle powered on, press the "set" button on the center console instrument panel to clear the tire pressure light. The primary condition is that the tire pressure values must be normal for the reset to be successful; otherwise, it cannot be reset. Additional information: The 2020 Magotan has a body length of 4865 mm, width of 1832 mm, height of 1471 mm, and a wheelbase of 2871 mm. It is a four-door, five-seater sedan with a fuel tank capacity of 66 liters and a trunk capacity of 533 liters. The vehicle is classified as a mid-size car and is equipped with either a 1.4-liter turbocharged engine or a 2.0-liter turbocharged engine.
As an average car owner who enjoys figuring out minor car issues myself, resetting the tire pressure light on a 2020 Magotan is quite simple. First, ensure all tire pressures are correct—typically around 2.2 bar for the front tires and 2.5 bar for the rear. Start the engine but don’t drive, then use the multifunction button on the right side of the steering wheel to navigate to the vehicle settings menu on the dashboard. Select the 'Tires' or 'Comfort Functions' option, and inside, you’ll find the button to store the tire pressure monitoring system settings—just confirm it. The whole process takes about a minute. I’ve also made it a habit to check tire pressure monthly, which helps prevent tire wear and safety risks. If the light goes off quickly, the pressure is correct; if it keeps coming back, consider a sensor issue and have a mechanic check it.
As a veteran driver with over a decade of experience driving Volkswagen vehicles, I believe tire pressure light reset is all about safety details. First, find a flat spot to park and manually check if each tire's pressure meets standards—don't ignore the recommended values on the door frame label. Then, get in the car, start the ignition, use the left steering wheel buttons to navigate to the combination instrument menu, select the tire option in the 'Settings' section, and click store or reset. The light will disappear after the system prompts confirmation. Remember not to operate while driving—uneven tire pressure can damage wheels and affect fuel efficiency. If the light stays on, check for leaks or faulty sensors. Volkswagen's system is reliable, but issues should be addressed promptly.
In maintenance work, we often encounter tire pressure issues with the Magotan, and the solution is quite simple. Just ensure the tire pressure is normal, around 2.3 bar. After entering the car, press the start button without stepping on the accelerator, navigate to the car information menu using the steering wheel buttons, find the tire pressure monitoring option, and select to store the current values. After resetting, the light will go off, and the system operates based on wheel speed sensors. If the light repeatedly comes on, it may indicate uneven tire wear or a sensor malfunction, requiring professional inspection.
