How to Reset the Tire Pressure Light on a 2018 Camry?

[JulianFitz]

The method to reset the tire pressure light on a 2018 Camry is as follows: 1. Locate and press the instrument information switch button on the multifunction steering wheel; 2. The car's tire pressure information will appear on the instrument panel. If the tire pressure is abnormal, a tire pressure warning will also appear here. Then, press the RES plus button on the multifunction steering wheel; 3. Switch to the tire pressure monitoring setup interface and click the reset button to reset the tire pressure light. The Camry is a mid-size sedan under GAC Toyota. In terms of body dimensions, it measures 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. It features a MacPherson strut independent front suspension and an E-type multi-link independent rear suspension.

[SanEmilio]

I know how to solve the tire pressure light issue for the 2018 Camry. From my experience, the reset process is actually quite simple. First, park on level ground and ensure the engine is off. Use a tire pressure gauge to check the pressure of all tires, including the spare tire—don’t forget that. The recommended pressure is usually around 35 psi, as stated in the owner’s manual. Wait five minutes for the tires to cool down before rechecking. If the pressure is normal, get in the car, start the engine (but don’t drive), and use the control buttons on the left side of the steering wheel to navigate left or right until you find the vehicle information settings menu. Press the OK button to enter, then locate the tire pressure calibration option. Hold the button for five seconds until you hear a beep, and the light will turn off. Be careful not to perform this operation on bumpy roads, as it may trigger false alerts. If the light remains on, it could indicate a faulty sensor or unstable pressure—in that case, it’s best to visit a 4S shop for inspection. Remember to check your tires regularly to prevent issues—safety comes first.

[MaryDella]

Every time the tire pressure light comes on, I reset it myself, and it's quite straightforward with the 2018 Camry. After you park the car, turn off the engine and wait a few minutes for the tires to cool down. Then, use a tire pressure gauge to check the pressure of each tire. Make sure they're all within the standard range, such as 36 psi for the front tires and 35 psi for the rear tires, referring to the label on the door frame. Next, start the car but don't move it. The buttons on the steering wheel are quite handy: press the left or right button to switch to settings, click the OK button in the middle, scroll to the tire pressure system, and hold the OK button for three seconds. Once the light goes off, start the car to test it—if everything's normal, you're good to go. This method is quick, taking only about two minutes, and saves you a trip to the repair shop. However, if the light keeps flashing after resetting, it might indicate a sensor malfunction or a leak, requiring a tire replacement for a complete fix. Developing a habit of checking tire pressure before driving is very practical.

[LeDallas]

I tried resetting the tire pressure light on an 18 Camry, and the method was straightforward: first, turn off the engine to check the tire pressure, ensuring the cold readings match the manual's specifications. Start the car but don't drive, use the buttons on the right side of the steering wheel to navigate to the vehicle settings menu, press OK to enter; scroll to the tire pressure calibration item and hold the confirm button for a few seconds until the light goes off. After the operation, drive a short distance to see if it's normal. If unsuccessful, check the tire pressure or sensors, and seek help from a professional technician if necessary.