How to reset the tire pressure light on a 2014 base model Tiguan?

How to Install License Plate Nuts?

Installation method is as follows: 1. Prepare the screw components, including spacers, screws, and caps, which need to be obtained from the vehicle management office. Do not use your own screws for fixing. If the screw components are not fixed according to regulations, you may face penalties; 2. At the location where the license plate is to be mounted on the car, you can see the fixing points. Place the side of the license plate with the license plate number facing outward, then align it with the car's fixing points, ensuring the middle holes are also aligned; 3. Insert the screws into the holes and secure them with a flat-head screwdriver. Do not tighten them completely; just ensure the screws do not fall out; 4. Install screws at all other fixing points, similarly securing each screw without tightening them completely. If tightened prematurely, it will be difficult to adjust the position later; 5. After all screws are in place, adjust the license plate position, then fully tighten all screws; 6. Finally, align the caps with the spacers and press them into the screws with slight force to secure them in place. The license plate installation is now complete.

3

0

Share

What are the differences between cornering lights and adaptive headlights?

Turn assist lights are fundamentally different from adaptive headlights in the following ways: 1. Adaptive headlights achieve their function by rotating the reflector cup and bulb; turn assist lights use a small bulb set at a special angle within the headlight that lights up at specific times to achieve the same effect. 2. In practical use, the effectiveness of turn assist lights in illuminating blind spots is not as good as that of adaptive headlights. Additional information: Details about turn assist lights and adaptive headlights are as follows: 1. Turn assist lights refer to a separate set of bulbs that light up on one side when the driver turns the steering wheel (some vehicles also use fog lights as turn assist lights), helping to illuminate the blind spots in the curve while driving. Shortly after the steering wheel is straightened, the single-sided turn assist light will turn off. 2. Adaptive headlights, also known as dynamic bending lights, refer to headlights that can rotate a certain angle in the direction of the turn when the car is turning, expanding the field of vision. This helps to illuminate the "unreached" area in advance, providing all-around safety lighting to ensure the driver has the best visibility at all times.

14

0

Share

What Causes a Decrease in Vehicle Power?

There are several reasons for a decrease in engine power: 1. Poor gasoline quality and fuel line blockage. 2. Improper tire pressure. 3. Excessive carbon buildup and spark plug wear. 4. Dirty throttle body or slipping/damaged belts. Precautions for using a car engine are as follows: 1. Avoid driving in neutral: The engine inherently has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation while using the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and promptly communicate with the car 4S shop to eliminate potential safety hazards. 3. For cars equipped with turbochargers, do not turn off the engine immediately after high-speed driving or climbing a slope. Let it idle for 10 minutes before shutting it down. Turbocharged engines accumulate carbon deposits several times faster than naturally aspirated engines. 4. When brake fluid is contaminated with water or impurities, or if sediment is found, it should be replaced or carefully filtered promptly. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

11

1

Share

Can a Flood-Damaged Car Be Driven After Repair?

Lightly flood-damaged vehicles can be driven after repairs, but fully submerged cars are recommended to be scrapped directly. Some cars may have been submerged, but the water only reached the chassis, causing the floorboard to become damp. The likelihood of significant water ingress is low, and the impact on electrical equipment is minimal. Such vehicles can be restored to proper technical condition through repairs and can be driven without any issues afterward. Common problems that may arise with flood-damaged cars include: 1. Moldy Interiors: The most noticeable and superficial issue with flood-damaged cars is the tendency for the interior to develop mold. Interior materials are often absorbent, and rainwater contains numerous impurities and bacteria. The enclosed and poorly ventilated cabin creates a highly humid environment after flooding, making it easy for mold to grow. 2. Engine Damage: If the engine has been flooded, attempting to start the car can cause severe deformation of the connecting rods. Insurance companies often deny claims in such cases. 3. Transmission Failure: If the water level rises above the engine compartment, the transmission is highly likely to be flooded. Once water enters the transmission, the vehicle may experience issues like slipping, shaking, or rough gear shifts, potentially shortening the transmission's lifespan or even rendering it unusable.

3

0

Share

How to Reset the Maintenance Reminder on the New Santana?

New Santana maintenance reminder reset method: First, turn off the ignition switch. Press and hold the reset button on the instrument panel with your left hand, while simultaneously pressing the right button with your left hand and turning on the ignition switch. Keep holding the reset button until the maintenance light enters reset mode. Release the reset button and press the left button once within 20 seconds to confirm the reset. Below is relevant information about vehicle maintenance: 1. When the car maintenance light comes on, the correct approach isn't to simply reset the maintenance reminder light, but first determine whether the vehicle actually requires maintenance. Vehicle maintenance generally involves preventive work such as inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain components. 2. Maintenance primarily covers systems including the engine, transmission, air conditioning, cooling, fuel, and power steering systems. Its purpose is to maintain vehicle cleanliness, normal technical conditions, eliminate potential hazards, prevent faults, slow deterioration, and extend the service life. 3. Regarding vehicle maintenance cycles: Generally, the oil change interval is 5,000 kilometers, but the specific replacement cycle and quantity should be determined based on the vehicle model's relevant information.

7

4

Share

What brand is WANLI tire?

WANLI is Wanli Tire, a tire brand under Guangzhou South China Rubber & Tire Co., Ltd. Wanli Tire was introduced in 1988, and the group's products cover new energy bus tires, light truck semi-steel radial tires, and heavy truck steel radial tires, among others. Wanli Tire has quality management system certification for the manufacturing industry. Guangzhou South China Rubber & Tire Co., Ltd. is a large state-owned enterprise that introduced professional technology to produce radial tires. It offers a wide range of product series, including passenger car tires, snow tires, urban SUV and off-road tires, and commercial load-bearing tires, with over 1,200 specifications and tread patterns. Different tire tread patterns have varying performance characteristics and usage focuses. Tire selection tips: Choose new tires of the same size as the original ones. Tires for aggressive driving wear out faster, so opt for durable tires. For national highways or expressways: Braking distance at high speeds is crucial for maximum safety. Select tires with the shortest braking distances on both dry and wet surfaces. For comfort during long trips, choose tires that provide a smooth ride (with minimal bumps and noise). For performance, prioritize high-performance tires. For city driving: Braking distance is essential to handle urban hazards like pedestrians crossing roads. Choose tires with the shortest braking distances on dry and wet surfaces. For long mileage, tires undergo deformation and sliding when subjected to engine power or braking force. Sliding and friction wear down the tread rubber, so select tires with longer mileage life. For fuel efficiency, tires with lower rolling resistance significantly reduce fuel consumption. For VIKING tires in daily use, pay attention to the following: Regularly inspect the tire surface for cracks, deformations, or other defects. As tires wear, the tread grooves gradually become shallow. Worn-out treads lose their water drainage and anti-skid functions, drastically reducing the vehicle's performance. Small cracks can lead to blowouts at high speeds. Additionally, promptly remove stones stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road.

2

5

Share

How to reset the tire pressure light on a 2014 base model Tiguan?

How to Install License Plate Nuts?

What are the differences between cornering lights and adaptive headlights?

What Causes a Decrease in Vehicle Power?

Can a Flood-Damaged Car Be Driven After Repair?

How to Reset the Maintenance Reminder on the New Santana?

What brand is WANLI tire?

How to Remove the Cabin Air Filter of Buick Envision?

Can I pick up the ordered car later?

Will 4S stores sell flooded cars as new cars?

What Do the Two Numbers in Tire Pressure Display Represent?