How to reset the tire pressure indicator light on the CRV dashboard?
4 Answers
Method to reset the tire pressure indicator light on the CRV dashboard: Press the arrow button at the lower right corner of the steering wheel until the central control screen displays the personalized settings. Press the reset button, and the central control screen will show the option to enter the tire pressure monitoring system calibration. Press the reset button again, then press the arrow button at the lower right corner of the steering wheel. The central control screen will display "Calibration Started," and the process will be completed in a few seconds. The CRV is a classic urban SUV model produced by Dongfeng Honda. It is equipped with a 2.0L DOHC i-VTEC engine, delivering a maximum power of 110 kW and a maximum torque of 190 Nm. The vehicle's dimensions are 4630mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2620mm.
Don't panic when the CRV tire pressure light comes on, let me guide you step by step. First, confirm that the actual tire pressure of all four tires is normal, including checking the spare tire. Then start the car, find the vehicle settings menu on the center console screen, and select the tire pressure monitoring system calibration. For newer CRV models, you can operate it via the steering wheel buttons, while older models require using the small stick on the instrument panel. After resetting, drive at a constant speed for 15 minutes, and the light should go off. If it remains on, it's likely that the sensor is broken or the wheel balance wasn't done properly during tire repair. Once, my light stayed on for three days after changing tires, and it turned out the sensor on the rim was damaged—replacing it solved the issue. Remember, after calibrating the tire pressure, it's best to drive on the highway for a while, as the system needs to relearn the wheel speed data.
To turn off the tire pressure light, different approaches are needed depending on the situation. The simplest method is when the tire pressure is normal—just use the steering wheel controls to enter the vehicle settings and select tire pressure calibration. If you've recently patched a tire, first ensure it's properly inflated, as a difference of just 0.3 bar can trigger the light. If the light remains after resetting, there might be a slow leak, like from a nail—I often use soapy water to check for leaks. An underinflated spare tire can also trigger the warning. Another common issue: cold winter temperatures can cause a sudden drop in tire pressure, requiring manual system reset after adding air. The sensor battery lasts about 5 years, and replacement costs around 300 yuan. If the light comes on after disconnecting the battery, just drive a few kilometers for an automatic reset.
There are three ways to reset the CRV tire pressure light: First, check the tire pressure, with the standard values marked on the driver's door frame. If the tire pressure is normal, proceed to calibrate in the system menu. If you can't find the button, try holding down the TRIP button on the dashboard. After calibration, drive for half an hour—if the light goes off, it's successful. If it stays on, focus on the recently repaired tire, as the sensor might have shifted. Remember to install the original sensors when changing rims. Last year, my tire pressure light stayed on constantly, and it turned out to be mud covering the sensor on the inner side of the rim. In emergencies, you can disconnect the battery for three minutes, but this won't clear real faults. It's recommended to check tire pressure and sensors before winter each year.
