How to Reset the Sunshade of Tiguan's Sunroof?

1 Answers
Emil
07/24/25 5:28pm
The owner should first turn on the car's power to ensure the sunroof motor can function. Then locate the sunroof control button on the ceiling near the upper right side of the driver's seat. The owner should press the backward button once, followed by the forward button. After the sunroof is fully closed, rotate the round knob clockwise to the end. Below are the reset method and precautions for the sunroof: 1. Before opening the sunroof, check for any obstacles on the roof that might hinder its sliding. Avoid using the sunroof on bumpy roads to prevent damage to the sunroof and related sliding rail components due to vibrations. Do not open the sunroof during rainy days or when washing the car to prevent rainwater or water droplets from accelerating the aging and rusting of the rubber seals and metal parts. 2. After the sunroof is fully closed, rotate the round knob clockwise to the end. The sunroof control button consists of three parts: the round knob is for left and right rotation to adjust the sunroof size, the forward arrow is the closing button, and the backward arrow is the opening button.
Was this review help?
20
0
Share
More Forum Discussions

Do You Need to Press the Clutch When Starting the Car?

You need to press the clutch when starting the car. Pressing the clutch primarily prevents the car from suddenly lurching forward during startup, thereby avoiding accidents. This is especially crucial when starting on uphill or downhill slopes. The working principle of the clutch is as follows: The driving and driven parts of the clutch temporarily separate or gradually engage through friction between their contact surfaces, allowing mutual rotation during transmission. Automotive clutches include friction clutches, hydraulic torque converters, and electromagnetic clutches. Friction clutches are further divided into wet and dry types. Currently, most clutches paired with manual transmissions are dry friction clutches, which can be categorized into single-plate, double-plate, and multi-plate types based on the number of driven discs.
1
5
Share

How often should the air filter be replaced?

Car air filters should be replaced every 15,000 kilometers or approximately once a year. The specific replacement interval depends on the vehicle's usage and driving environment. If frequently driven in dusty or heavily polluted areas (e.g., severe haze), the replacement cycle should be shortened to around 10,000 kilometers. The steps to replace the air filter are: 1. Open the hood and locate the air filter housing, typically positioned beside the engine with connected pipes; 2. Remove the housing cover and take out the old filter; 3. Clean the filter housing, install the new filter, and securely close the housing cover. The air filter is a device designed to remove particulate impurities from the air, characterized by high filtration efficiency, low airflow resistance, and extended continuous operation without maintenance.
2
0
Share

What to do with ETC when changing license plates?

The method to handle ETC when changing license plates: 1. Remove the ETC reader from the original vehicle; 2. Bring the ETC card, original ID card, new vehicle registration certificate, and relevant documents for both the old and new vehicles to the bank branch where the ETC card was issued to complete the transfer procedures; 3. Contact ETC personnel to reinstall the device, input the new license plate information, and perform installation and scanning activation. ETC is an electronic toll collection system that uses a vehicle-mounted electronic tag installed on the windshield to communicate with microwave antennas in ETC lanes at toll stations via dedicated short-range communication. It leverages computer networking technology for backend settlement with banks, allowing vehicles to pass through highway or bridge toll stations without stopping to pay fees.
3
5
Share

Why is there a strong smell of gasoline when starting the car?

The reason for the strong smell of gasoline when starting the car is: the gasoline is not completely burned. When the car starts while cold, the onboard computer will appropriately increase the fuel injection based on the intake air temperature and coolant temperature signals. At this time, the engine has not yet reached its normal operating temperature, resulting in poor combustion efficiency. This causes some fuel to be expelled without being fully burned, leading to a strong gasoline smell when starting the car. In older cars, the rubber hoses in the engine compartment are prone to aging, which can cause leaks. If you notice a strong gasoline smell when starting the car and the smell persists, you should check the condition of the fuel lines. If the strong gasoline smell remains after the car has been running for a while, it indicates a malfunction. Common issues include insufficient air intake through the throttle, which leads to incorrect air flow information affecting the fuel injection amount, resulting in a heavier gasoline smell.
5
1
Share

Can China II vehicles still be driven in Beijing?

China II vehicles are not allowed to enter within Beijing's Fifth Ring Road, but they can still be driven during certain specific time periods. Since 2019, many cities have begun implementing the China VI emission standards. After the implementation of the China VI emission standards, many China II and China III vehicles have also been subject to driving restrictions. The implementation of strict emission standards by the state can constrain automakers and encourage them to produce more environmentally friendly vehicles, which is beneficial for protecting the Earth's environment. Initially, the China VIa standard was implemented, and it is expected that the China VIb standard will be implemented by 2023. The China VIa standard stipulates: 1. Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven; 2. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven; 3. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven; 4. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven.
11
2
Share

Why does the car shake when starting?

The reasons why the car shakes when starting are: 1. The throttle is dirty or the fuel injector has excessive carbon deposits. When there is too much carbon deposit inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an excessively lean mixture for cold start, making it difficult to start and causing idle shaking after cold start; 2. Poor working conditions of the ignition system and spark plugs can also lead to such fault phenomena; 3. If the engine carbon deposits have been cleaned, the throttle has been washed, and the spark plugs have been replaced, but the car body still shakes at idle, it is recommended to check whether the fuel supply pressure and the intake pressure sensor are normal. Abnormal fuel pump supply pressure or incorrect values and poor working conditions of the intake pressure sensor can also cause the car body to shake.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.