How to Reset the Sunroof Motor After Replacement on Explorer?
3 Answers
Press the vehicle's one-touch start button to power on the vehicle; otherwise, the sunroof cannot be initialized. Then, push the sunroof control button and hold it for ten seconds after the sunroof opens. Turn the knob from position A to position B, wait until the sunroof is fully slid open, then close it again. Turn off the ignition and repeat the previous step.
I remember after replacing the Explorer's sunroof motor, you need to reset it first before it can work properly. I've tinkered with many cars myself, and it's quite simple: first turn the key to the ON position without starting the engine, then press and hold the sunroof's close button for about 10-20 seconds. Wait until you hear a 'click' sound or see it move twice and stop, then it's done. The reset is necessary because the new motor needs to initialize its position; otherwise, the sunroof might not open straight or could get stuck. After resetting, don't forget to test opening and closing it a few times to ensure smooth operation and avoid malfunctions halfway. During regular maintenance, clean the tracks more often to prevent dust buildup from causing issues. If there's no response, check the battery voltage—weak batteries in older cars might cause the reset to fail, so try replacing it with a new one. In short, resetting is a piece of cake and takes less than five minutes, but you must be patient and hold the button without letting go. Even a beginner can handle it.
Recently, I helped a friend replace the sunroof motor, and resetting it was crucial. The steps are super simple: first, power on by turning the key to the ACC position without starting the engine, then press and hold the sunroof close button on the control switch for about 10 seconds until you hear a change in sound or the movement stops. Resetting allows the sunroof to memorize its new position, ensuring safe operation. After resetting, be sure to test opening and closing the sunroof a few times. If it gets stuck, don’t force it to avoid damaging the motor. Make sure the battery is sufficiently charged, as low voltage can interfere with the reset process. For daily driving, keep the sunroof dry and avoid prolonged exposure to sunlight to extend its lifespan. I recommend doing a thorough check after the job to prevent recurring issues—it’s both hassle-free and safer, giving you peace of mind while driving.
