How to reset the Skoda Octavia wrench light?

2 Answers
EmmaAnn
07/24/25 7:29pm
To reset the Skoda Octavia wrench light, follow these methods: 1. It can be reset through the multifunction steering wheel or using a computer diagnostic tool. 2. Alternatively, press and hold the button on the right side of the instrument panel, then turn the ignition to the ON position. The maintenance reminder wrench will appear. Release the right hand and press the button on the left side of the instrument panel to reset. 3. Insert the key, press and hold the reset button below the speedometer with your left hand, turn the key to the ON position (not the ignition position) with your right hand, rotate the reset button clockwise to the right with your left hand, turn off the ignition, and restart the car. As driving time increases, the wear and tear of internal components will gradually worsen. To ensure normal operation of the car, it is recommended to replace the components in time after reaching a certain mileage. After successful replacement, the maintenance light should also be reset.
Was this review help?
20
2
Share
Leonard
08/11/25 10:46am
As a long-time owner of a Skoda Octavia, I've dealt with this maintenance reminder light (the little wrench icon) multiple times. It alerts you when the vehicle is due for service, such as an oil change or filter replacement. The reset procedure is simple and reliable: First, make sure the car is parked with the engine off and doors closed. Then locate the small 0.0 button on the instrument cluster (next to the speedometer) and press it firmly with your thumb. While holding the button, turn the ignition key to the "ON" position without starting the engine. Maintain this position for several seconds (about 5-10 seconds) until "service" or "reset" appears on the display. Release the button, and the wrench icon will disappear. The whole process takes under 30 seconds, but remember - the actual maintenance work is what really matters. Ignoring these reminders accelerates part wear and increases repair costs. Regular resets combined with timely maintenance make your car more durable, especially giving peace of mind during long-distance drives.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

What items are included in the first maintenance of the Nissan New Sylphy?

Nissan New Sylphy's first maintenance mainly involves changing the engine oil and oil filter. The first maintenance cycle is 5,000 kilometers or three months, whichever comes first. There are two indicators for a car's maintenance cycle: one is the time indicator, and the other is the mileage indicator. The first maintenance cycle should be determined based on these two indicators. The New Sylphy is a family sedan under Dongfeng Nissan, which has won consumers' favor with its rich configurations and outstanding cost performance. Dongfeng Nissan launched the newly redesigned New Sylphy, which, as a strategic global model of Nissan, has its predecessor as the first-generation luxury sedan in China, the "Bluebird," renowned for its excellent product performance and noble driving experience.
9
2
Share

How to Connect CarPlay in Lexus?

To use CarPlay in a Lexus, connect your iPhone to the car via USB. You can also activate iOS's voice assistant Siri by long-pressing the virtual Home button on the CarPlay interface and then giving voice commands. Below is some relevant information about CarPlay: 1. Simplified Design: CarPlay does not simply replicate the iPhone interface on the car's screen. Its design is tailored to the in-car usage scenario, adapting the functions displayed on the CarPlay interface to reduce information overload, simplify interface levels, and enlarge interface elements. 2. Seamless Integration of CarPlay Navigation and Calendar: When you create an event in the iPhone's Calendar app, specifying a time and location, and set the destination as the event location, opening the map in CarPlay at the scheduled time will display a floating window for the nearest scheduled destination. Clicking on it will start navigation. While navigating, switching to other app interfaces will show turn-by-turn prompts at the top of the CarPlay interface in the form of notifications.
6
2
Share

What is the engine model of the Porsche 718?

The engine model of the Porsche 718 is DPG. The Porsche 718 is a more powerful S model, and its performance in terms of power is quite impressive based on the parameters. It is equipped with a turbocharged engine with a maximum power of 257 kW and a peak torque of 420 Nm, achieving a 0-100 km/h acceleration time of 4.4 seconds. The exterior of the Porsche 718 is eye-catching, featuring the family-style 'frog face' design paired with a hardtop roof and soft-top convertible, giving it a particularly domineering presence reminiscent of the Porsche 911. The interior design of the Porsche 718 is relatively simple, and the visual effect it presents does not even convey a sense of luxury.
1
4
Share

What is the Cause of Transmission Pressure Sensor Failure?

The following are the causes of transmission pressure sensor failure: 1. Open circuit conditions: open circuit in the bridge supply leads (power supply lines), open circuit in the output signal lines, and open circuit in the bridge circuit. 2. Power supply failure: The power supply providing voltage to the sensor is not functioning properly. When the power supply completely fails to provide its standard voltage, it is equivalent to the aforementioned open circuit in the power supply lines. Additionally, when the supply voltage is too low, the sensitivity of the sensor's feedback information decreases; conversely, when the supply voltage is too high, the current passing through the strain gauge may exceed its rated current, causing damage to the strain gauge (during transmission repairs, cases have been encountered where repeated pressure sensor failures were caused by excessively high ECU supply voltage).
19
0
Share

What does a fuel consumption of 99.9 mean?

After resetting the fuel gauge, the fuel consumption will display 99.9, but it will decrease after driving for a while. Below is some relevant information about fuel consumption per 100 kilometers: 1. Introduction to fuel consumption per 100 kilometers: This refers to the amount of fuel a vehicle consumes when driving a certain distance at a specific speed. It is a theoretical indicator for vehicles. Manufacturers measure this value under controlled conditions using a dynamometer installed on the vehicle's chassis, converting it into speed parameters, and then calculating the theoretical experimental fuel consumption per 100 kilometers for the model. 2. Calculation method for fuel consumption per 100 kilometers: Calculation formula: (Fuel cost ÷ Fuel price) ÷ Distance traveled in kilometers × 100 = Fuel consumption (liters). Most vehicles now display the fuel consumption per 100 kilometers.
1
2
Share

Where to Add Antifreeze for Geely Emgrand?

Geely Emgrand's antifreeze filler port is located inside the engine compartment. Open the left side of the engine hood, and you will see the marking. Method for replacing antifreeze: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes. Pay special attention to the five-way water pipe, which is named for its five connections to different parts. Antifreeze flows through the five-way pipe and is then distributed to various parts of the car to function. If there is any antifreeze leakage in this part, replace the water pipe or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continuously inject water into the reservoir to allow it to flow through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will be slightly pinkish. Continue adding clean water until clear water flows out. Note: Remember to remove the heater hose and drain the water from the heater core. About an hour after draining, add the new antifreeze through the radiator hose—this allows the antifreeze to flow quickly into the radiator. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the fluid level will drop. Add more antifreeze until it reaches the "MAXT" mark on the reservoir.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.