How to Reset the Red Wrench Light on JAC Refine S3?
4 Answers
The method to reset the red wrench light on JAC Refine S3 is: 1. Start the engine; 2. Press and hold the central button on the instrument panel, then turn off the engine; 3. While keeping the button pressed, start the engine again; 4. Release the button once the wrench symbol disappears. The JAC Refine S3 is a compact 5-door, 5-seat SUV with body dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, with a wheelbase of 2560mm. It is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 85 kW and a maximum torque of 150 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
As a JAC Refine S3 owner, when I see the red wrench light on the dashboard, I know it's the vehicle reminding me that maintenance is needed. To reset this light manually, the method is quite simple: First, turn off the engine and remove the key. Then locate the button on the dashboard, usually the trip reset or settings button, and hold it down without releasing. Next, turn the key to the ON position without starting the engine, and hold for about 5-10 seconds until the wrench light flashes and turns off. Remember to reset it promptly after maintenance; otherwise, the persistent light can be annoying and may mask actual faults. It's recommended to perform a full maintenance service, such as oil and filter changes, every 5,000 kilometers or so to protect the engine and extend its lifespan. Always pay attention to the indicator lights while driving to maintain good vehicle condition, ensuring better fuel efficiency and safety.
I've been driving my JAC Refine S3 for several years, and every time the red wrench light comes on, it means it's time for maintenance. To reset this indicator light, the procedure is: turn off the engine, press and hold the button on the dashboard, turn the key to the ON position without starting the engine, hold for a few seconds until the light goes out. But the key point is not to ignore it—the light indicates that the vehicle's maintenance system is reminding you to change the oil or inspect components. If you don't reset it, the next reminder might fail, leading to potential risks like increased engine wear. After maintenance, always perform a reset to ensure the new mileage is set correctly. I always stick to the maintenance schedule—it saves money and hassle. A car is a tool for travel, and safety comes first. When the light comes on, it's time to take action.
As a JAC Refine S3 owner, I've encountered the red wrench warning light. Here's a quick reset method: After turning off the engine, press and hold the dashboard button while turning the key to the ON position (without starting). Hold for several seconds until the light disappears. Repeat this step after maintenance – simple and convenient. Don't panic when the light appears; it's just a reminder. The vehicle operates normally after reset. Developing regular maintenance habits helps minimize faults.
