How to reset the pressure loss warning on Volkswagen Tiguan L?

What does Start-Stop mean?

Start-Stop system, translated as Start-Stop system in English, is when the vehicle is in a stopped state (not in park), the engine will pause operation (instead of maintaining traditional idle speed). During this pause, the lubricating oil inside the engine continues to circulate, keeping the engine internally lubricated. When the brake pedal is released, the engine will restart. Since the lubricating oil has been continuously circulating, frequent stops and starts will not cause wear to the internal parts of the engine. Below is related information: 1. The main function of the engine: The main function of the engine is to increase pressure and improve intake volume to achieve high power output, making the car more powerful. Engines can be categorized by their intake system operation into naturally aspirated and turbocharged types; by cylinder arrangement into inline engines, V-type engines, W-type engines, and horizontally opposed engines. 2. STT: Short for STOP & START. The STT intelligent fuel-saving system is a system that controls engine start and stop. This system uses a computer to determine the vehicle's state, such as when the vehicle is stopped at a red light or in traffic congestion. The computer can control the engine to automatically stop running, and during this stop phase, it does not affect the use of in-car equipment like air conditioning or audio systems.

6

2

Share

What engine is used in the Volkswagen Tharu?

The Volkswagen Tharu is equipped with two engine models: EA211-DJS and EA888-DPL. The EA211-DJS engine delivers a maximum horsepower of 150 HP, a maximum power output of 110 kW, a maximum power speed of 5000 rpm, and a peak torque of 250 N·m. The EA888-DPL engine offers a maximum horsepower of 186 HP, a maximum power output of 137 kW, a maximum power speed range of 4100-6000 rpm, and a peak torque of 320 N·m. The EA211-DJS engine in the Volkswagen Tharu is produced by SAIC Volkswagen's engine plant, while the EA888-DPL model is manufactured by the Loudang Engine Factory. For daily maintenance of the Volkswagen Tharu's engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various engine issues. To prevent failures, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

14

2

Share

What is the NORMAL mode in a car?

NORMAL in a car refers to the standard driving mode, which is the most commonly used mode. In this mode, every aspect of the car's performance is balanced, including fuel efficiency, quietness, and power. It achieves the optimal balance between fuel economy, quietness, and power performance, making it suitable for city driving. To meet different driving requirements and adapt to various road conditions, automatic transmissions are equipped with different shift logics in their electronic control units. A mode selection switch is also provided on the control panel, allowing drivers to choose the transmission control mode independently. Common control modes for automatic transmissions include the following: Economy Mode (ECONOMY): This control mode is designed to achieve the best fuel economy. When the automatic transmission operates in economy mode, its shift logic ensures that the engine frequently runs within the economical speed range during driving, thereby improving fuel efficiency. Power Mode (POWER): This control mode is designed to maximize the car's power performance. In this mode, the automatic transmission's shift logic ensures that the engine frequently operates within the high-power range during driving, thereby enhancing the car's power performance and climbing ability. Snow Mode (SNOW): Some automatic transmission models feature a "snowflake" button near the gear lever, which activates the snow mode. This mode uses preset automation programs to make the transmission start in second gear, ensuring smoother and gentler torque output and reducing the likelihood of tire slippage on slippery snow surfaces. Sport Mode (SPORT): The electronic control unit increases the engine speed to maintain sufficient torque and enhance power performance, though this consumes more fuel. It briefly boosts the engine's power for rapid acceleration, essentially acting as an acceleration gear, hill-climbing gear, or overtaking gear. In sport mode, the engine speed rises sharply. Additionally, high engine speeds in sport mode can help remove carbon deposits from the engine. However, it is not advisable to use this mode continuously, as it increases the transmission's load, raises its temperature, and accelerates wear. Individual Mode (INDIVIDUAL): This mode allows drivers to customize the feedback of various modules, typically including steering wheel weight, chassis stiffness, throttle response, transmission reaction, engine mode, steering system mode, and exhaust system mode.

7

1

Share

What Causes the Engine Warning Light to Illuminate in the Ford Kuga?

There are primarily seven reasons why the engine warning light may illuminate: Sensor Malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or Oil Quality Issues: Failure to use the fuel or engine oil as recommended by the manufacturer may cause engine wear, leading to the warning light activation. Poor Combustion of Air-Fuel Mixture: Incomplete combustion can result in engine carbon buildup or knocking. Once detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Issues such as faulty spark plugs, ignition coils, fuel pump failures, or clogged fuel lines can cause poor combustion. Turbocharger Problems: Issues with the intake boost pipes or turbocharger can also trigger the engine warning light. The most common issue is turbocharger damage, often accompanied by symptoms like oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: Problems in the air intake system may lead to clogged engine pipes, and in severe cases, the engine warning light will illuminate. A dirty or uncleaned air filter can cause intake problems. Exhaust System Issues: Exhaust faults can also activate the engine warning light. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings. The catalytic converter is most frequently affected, especially due to the use of leaded gasoline, lead/silicon-based lubricant additives, physical damage, or fuel system malfunctions. Anti-Theft System Malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the system may prevent the engine from operating normally, accompanied by the warning light. Steps to Address the Illuminated Engine Warning Light: First, check whether the engine is running normally. If there are issues like shaking or black smoke, avoid restarting the engine—especially if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without engaging the clutch). The vehicle will enter self-diagnosis mode. After 5-10 seconds, observe whether the warning light turns off. If the light remains on, visit a service center as soon as possible. Technicians can use a diagnostic tool to retrieve error codes and perform targeted repairs.

9

5

Share

How to cancel Shanghai ETC device?

To cancel Shanghai ETC, you first need to go to the bank to terminate the credit card ETC function, and then go to the ETC service outlet to cancel the ETC service. ETC working principle: Through the on-board electronic tag installed on the vehicle windshield and the microwave antenna on the ETC lane of the toll station, dedicated short-range communication is carried out. The computer network technology is used to conduct background settlement processing with the bank, so that the vehicle can pass through the highway or bridge toll station without stopping, and can pay the highway or bridge fee. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front staying, in order to prevent the ETC device failure of the vehicle in front or no ETC device at all, a distance of more than 10 meters should be kept from the vehicle in front to prevent the automatic sensing from paying for the vehicle in front. The ETC lane recognition speed is 20km/h. If the speed is too fast, the vehicle device information cannot be read, and the deduction will also fail. Unauthorized disassembly or movement of the OBU device, ETC electronic tag falling off or loosening, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card is processed or the highway office for testing. Non-human loosening or falling off only needs to be reactivated. When using a debit card to bind ETC, insufficient balance will also cause the deduction to fail. You can follow the guidance of the on-site staff to go to the manual MTC lane and use cash or swipe cards to pass. The windshield of the car is too thick to cause poor sensing. Especially for vehicles that have been repaired after an accident and replaced the windshield, or friends who have modified the front windshield need to pay attention.

13

4

Share

Which Button is the Rearview Mirror Heater?

The rearview mirror heater button is typically marked with a rectangle containing three upward-curving arrows. The car's heating button activates electric heating wires embedded behind the mirror to reduce moisture, fog, and frost on the front and rear windshields and exterior rearview mirrors, thereby improving the driver's visibility and ensuring clear mirror surfaces. This enhances driving safety. Methods to activate the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is needed, as the driver's side has adjustment buttons. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60 degrees Celsius) within minutes. The heat is then emitted from the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively clearing frost and fog from the mirror. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires on the mirror, which consume significant power. Ensure the car is running when using this feature to avoid draining the battery, which could prevent the car from starting. Other methods for defogging rearview mirrors include: Opening windows slightly to create airflow between the inside and outside of the car, reducing temperature differences and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.

11

3

Share

How to reset the pressure loss warning on Volkswagen Tiguan L?

What does Start-Stop mean?

What engine is used in the Volkswagen Tharu?

What is the NORMAL mode in a car?

What Causes the Engine Warning Light to Illuminate in the Ford Kuga?

How to cancel Shanghai ETC device?

Which Button is the Rearview Mirror Heater?

Can motorcycles with out-of-town license plates be ridden in Shanghai?

Which One is the Clutch and Which One is the Brake in a Car?

How Long Can You Run the Air Conditioner While Parked?

What is the standard temperature for car air conditioning?