How to reset the one-touch window function in Lavida?
3 Answers
To reset the one-touch window function in Lavida, simply raise the window glass to its highest position and hold the window switch button for five seconds. Below is more information about the one-touch window function: 1. Introduction to the one-touch window function: The one-touch window function refers to a system where the car window glass can be fully raised or lowered with a single press of the button. Cars equipped with this feature have a two-stage window control switch. The first stage operates like a regular power window. The second stage allows the window to automatically open or close completely with just one press and release of the button. 2. Precautions for using the one-touch window function: Generally, after raising or lowering the window glass several times in succession, the vehicle may temporarily disable the window function for a few seconds to prevent overheating and damage to the window motor. Wait for the function to recover before operating it again.
I remember that the one-touch up/down function of my Lavida's windows sometimes failed, so I tried to reset it myself. The operation is quite simple: first, turn the car key to the ON position without starting the engine. Then, lower the window all the way down and hold the down button for a few seconds. Next, pull the button up, and the window will rise. Continue holding the up button until the window is fully closed, then keep holding for another two or three seconds. Completing this step means the reset is successful. For daily maintenance, it's good to take care of the window tracks by spraying some lubricant to prevent sticking, which can reduce the frequency of malfunctions. For daily drivers like me, learning this little trick saves frequent trips to the repair shop.
The one-touch window reset issue is commonly reported by Lavida owners. Here's a brief explanation. Usually, the window control module needs to relearn its positions. First, turn on the ignition or rotate the key to ACC position to ensure power supply. Then press and hold the down button until the window fully lowers, maintaining this for a few seconds. Next, pull up the raise button to bring the window to the top position, again holding for several seconds without releasing. This process helps the system memorize the limit positions, restoring normal operation next time. If the issue persists, check for button dust accumulation or wiring faults. Drivers should note that ignoring such minor issues for too long may affect driving safety.
