How to Reset the One-Touch Power Window of Volkswagen Bora?
4 Answers
If the one-touch power window malfunctions, it can be reset by following these steps: 1. Press the window button six times, releasing it briefly after each press. 2. With each press, you will see the window descend slightly. 3. Upon the sixth press, release the button and the window will automatically rise. 4. Then, lift the button upward. 5. The first lift should be held until the window reaches the top before releasing. 6. Perform a second lift and hold the button without releasing. 7. Wait for the window to automatically descend and then release the button to complete the reset. Related information on power window faults and maintenance: 1. If the electric window operates sluggishly, it is often due to depleted lubricant in the door's lift mechanism; remove the inner cover and replenish the lubricant. 2. If the window fails to move entirely, the switch may be faulty and require replacement. 3. If the electronic mechanism is unresponsive, check the relevant fuse for the power window circuit. 4. Deterioration in switch performance or difficulty in opening the window often indicates a faulty switch. 5. Before lubricating internal mechanical parts, remove the inner cover by first taking out the hidden screws and detaching the quick-action switch.
I've been driving my Volkswagen Bora for almost ten years, and resetting the one-touch window function is quite simple: First, roll the window all the way up until it's completely closed. Then, press and hold the window-up button on the driver's door for 5 to 10 seconds without releasing it. When you hear a slight click or see the dashboard lights flash, let go—that means the reset is successful. I usually do this before parking and turning off the engine—it's safe and hassle-free. If the one-touch function previously stopped working, it's often due to a battery disconnect or vehicle vibration disrupting the memory. Resetting can restore automatic up/down operation and prevent mid-way jams. Remember not to attempt this while driving to avoid distraction. Regular resets can also extend the button's lifespan—I do it every six months.
I frequently use the one-touch window reset feature on my Volkswagen Bora, and the steps aren't too complicated: After ignition, raise the window to the top, then press and hold the window switch for more than five seconds. Usually, the window will move slightly after three seconds to confirm the reset. I've used this method to fix several failure issues, like when the function disappeared after replacing the battery. Remember to turn the key to the ON position during the operation to ensure stable power supply to the system. If it doesn't work, it might be due to dust in the wiring or aging switches—try cleaning the connectors or gently tapping the door panel a few times. Beginners are advised to practice a couple more times; once you get familiar with it, it becomes as easy as playing a game. A little tip: keep the window tracks lubricated—spray some WD-40 to prevent noise.
Bora owner shares one-touch window reset experience: Hold the window-up button until the window is completely closed, then pull and hold the switch for 5-10 seconds without releasing. The whole process is simple and quick, usually done in the garage. Resetting typically solves lost automatic functions caused by rain or bumps - test several times after resetting to ensure proper operation. Occasionally do some maintenance by wiping button edges to prevent dirt buildup.
