How to reset the oil yellow warning light on Audi A6?

What Lights Should Be Turned On in Time When Driving in Foggy Weather?

When driving in foggy weather, it is necessary to turn on the fog lights, hazard warning flashers, and headlights in time. Safety precautions for driving in foggy weather: 1. Correct use of lights: Turn on fog lights in foggy weather as their light waves can penetrate the fog more easily and illuminate farther. When the fog is extremely thick, you can turn on the hazard warning flashers because yellow light has better penetration through fog. Remember not to use high beams, as their light waves will be reflected back by the fog, similar to shining on a vast white wall. 2. Use the horn for alerts when necessary: Since visibility is poor in foggy weather, it is advisable to honk the horn appropriately when overtaking, turning, or encountering pedestrians to provide a driving signal. 3. Reduce speed and avoid sudden braking: First, slow down. Poor visibility in foggy weather means most vehicles are moving slowly, and high speeds can easily lead to rear-end collisions. Additionally, reducing speed can help avoid sudden braking. It is difficult to judge distances in foggy conditions, and sudden braking can easily cause accidents for vehicles behind. 4. Avoid reckless overtaking: Do not rush to overtake in foggy weather, as low visibility makes it harder to assess the situation ahead of the vehicle in front. Therefore, especially in heavy fog, not only should you turn on the hazard warning flashers, but it is also best to maintain a certain distance and follow the vehicle in front. Only when you can confirm the situation ahead should you honk and pass at a low speed.

8

0

Share

What is the correct way to apply the brakes?

The correct way to apply the brakes is: 1. Braking over long distances: First release the accelerator, then apply the brakes. 2. Braking in rainy or snowy weather: Control your speed and brake early. Wet roads increase braking distance, so it's safer to control your speed and brake early to avoid skidding from sudden stops. 3. Braking on long downhill slopes: Use engine braking to descend slowly. Frequent braking on long descents can overheat the brake pads, reduce performance, or even cause brake failure. It's recommended to slow down and use engine braking for a steady descent. 4. Braking during sharp turns: Slow down before entering the turn. It's best to reduce speed before turning and avoid braking while steering, especially at high speeds, to prevent skidding. 5. Braking on bumpy roads: Drive slowly and use "pump braking." Driving too fast on rough terrain can damage the chassis due to excessive body movement. It's advisable to use "pump braking" to maintain slow and steady progress.

8

3

Share

How to Cancel a Scheduled Subject 3 Driving Test?

Here are the specific steps to cancel a scheduled Subject 3 driving test: 1. First, log in to the website where you originally scheduled the Subject 3 test on Baidu. Click on the "Driver's License Services" tab on the far left column. After carefully reviewing the information below, check "I have read and agree" and then click Next. 2. Fill in your personal information as required by the website and continue to click Next. 3. Enter the required information as prompted, use your mobile phone to receive the verification code, and then click Complete. 4. After successful submission of this step, the website system will automatically generate a service serial number, which you can note down (this number serves as the basis for any subsequent complaints if there are any issues). The website will then send an SMS within one business day to inform you whether the cancellation was successful.

10

5

Share

How Long Does the First Maintenance Take?

New car first maintenance time is 3-5 months, and the first maintenance mileage is 3000-5000 kilometers. Generally, it is based on whichever comes first between the mileage and the specified first maintenance time. Therefore, if the time has come but the mileage is insufficient, you still need to go for the first maintenance. Otherwise, the 4S shop may use the reason of not meeting the standards to prevent the information from being entered into the nationwide warranty system, resulting in loss of warranty. Introduction to car maintenance: 1. Modern car maintenance mainly includes the maintenance scope of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 2. The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.

7

4

Share

What is the On-the-Road Price of a Car?

On-the-road price refers to the total cost of a car from the production line to your hands. Detailed explanation of the on-the-road price: The on-the-road price is based on the purchase price of the car, plus additional costs such as vehicle purchase tax, insurance, and license plate fees. It is also vividly referred to as the 'drive-away price.' There are five categories of expenses when buying a car: 1. Ex-factory price: This is the selling price at the 4S dealership, usually the discounted price of the car, excluding other fees. 2. Vehicle purchase tax: A mandatory fee when purchasing a car, approximately 8.55% of the ex-factory price. 3. Car insurance: Includes compulsory insurance (mandatory) and commercial insurance (optional). 4. Vehicle and vessel usage tax: A mandatory tax at the time of purchase, and it must be paid annually. 5. License plate fees: Includes service fees, administrative costs, and license plate charges.

8

2

Share

Where to Inflate Tires with Insufficient Pressure?

Tires with insufficient pressure can be inflated at auto repair shops or 4S stores. You can also use a bicycle pump for inflation. It is best to purchase a portable electric car air pump (make sure it comes with a tire pressure monitoring device) and keep it in your car for convenient tire inflation anytime. Effects of insufficient tire pressure: 1. Increased friction coefficient with the road surface. 2. Heavy steering wheel, prone to deviation, etc. 3. Increased movement of various parts of the tire. 4. Reduced functionality of the cord and rubber, leading to delamination or cord breakage and excessive friction with the rim.

10

3

Share

How to reset the oil yellow warning light on Audi A6?

What Lights Should Be Turned On in Time When Driving in Foggy Weather?

What is the correct way to apply the brakes?

How to Cancel a Scheduled Subject 3 Driving Test?

How Long Does the First Maintenance Take?

What is the On-the-Road Price of a Car?

Where to Inflate Tires with Insufficient Pressure?

What car brand does the Lynk & Co 03 belong to?

Where is the license plate number starting with 'Dan' from?

How to adjust the height of the Vezel seat belt?

Can a China IV vehicle be transferred and re-registered?