How to Reset the Oil Service for Maxus G50?

What is the speed limit on a three-lane highway?

On a three-lane highway, the speed limits are as follows: the right lane is for speeds between 60-90 km/h. The three lanes consist of the fast lane, the overtaking lane (for small passenger vehicles) with speeds ranging from 90-120 km/h; the travel lane and the slow lane for large vehicles with speeds between 60-90 km/h, and the left lane for speeds of 110-120 km/h. Pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailers, and other motor vehicles with a maximum design speed of less than 70 km/h are not allowed on highways. The maximum speed indicated by highway speed limit signs must not exceed 120 km/h. When entering the highway from an on-ramp, motor vehicles should use the left turn signal and merge into the travel lane without obstructing the normal flow of traffic already on the highway. Additionally, there is a fourth lane, commonly referred to as the emergency lane. The highway emergency lane is reserved exclusively for emergency vehicles, including police cars, fire trucks, ambulances, and engineering rescue vehicles when performing urgent tasks. Vehicles experiencing sudden breakdowns or passengers with sudden medical emergencies may also use the emergency lane. Other vehicles are prohibited from stopping or driving in the emergency lane under non-emergency circumstances.

6

2

Share

What kind of oil does a generator use?

Generators use diesel or gasoline. Diesel generators: A diesel engine drives the generator to operate, converting the energy of diesel into electrical energy. In the cylinder of the diesel engine, the clean air filtered by the air filter is fully mixed with the high-pressure atomized diesel injected by the fuel injector. Under the compression of the upward-moving piston, the volume decreases, and the temperature rapidly rises to the ignition point of diesel. The diesel is ignited, the mixed gas burns violently, the volume expands rapidly, and the piston is pushed downward, which is called 'work'. Gasoline generators: A gasoline engine drives the generator to operate, converting the energy of gasoline into electrical energy. In the cylinder of the gasoline engine, the mixed gas burns violently, the volume expands rapidly, and the piston is pushed downward to do work. Working principle of generators: Whether it is a diesel generator or a gasoline generator, each cylinder does work in a certain order. The thrust acting on the piston is transformed into the force that drives the crankshaft to rotate through the connecting rod, thereby driving the rotation of the crankshaft. By coaxially installing the brushless synchronous AC generator with the crankshaft of the power machine, the rotation of the power machine can drive the rotor of the generator. Using the principle of 'electromagnetic induction', the generator will output an induced electromotive force, and a current can be generated through the closed load circuit.

17

5

Share

What problems will occur when a car's spark plugs burn out?

Spark plug failure manifests in the following ways: Difficulty in starting the car, both cold starts and warm starts become challenging, often requiring multiple ignition attempts. Engine shaking occurs, with noticeable vibrations during vehicle operation. Reduced driving power, with a significant feeling of insufficient power compared to normal conditions. Increased fuel consumption. Stalling incidents. Failure to meet exhaust emission standards. Common causes and diagnosis of spark plug failures: Several situations can lead to spark plug malfunction: Improper spark plug gap adjustment. A gap that is too small limits the contact area between the spark and the air-fuel mixture, and the flame quenching effect of the electrodes suppresses flame kernel growth, resulting in weak sparks and difficult mixture ignition despite sparking. A gap that is too large may prevent the ignition system from providing sufficient voltage to jump the gap between the electrodes. Cracked spark plug skirt. High-voltage current leaks through the crack, preventing sparking at the electrodes. Electrode carbon buildup, causing the center electrode to leak current to the surroundings instead of sparking to the side electrode. Excessive carbon deposits on the spark plug can short-circuit it, preventing sparking and burning out the insulator, damaging the spark plug. Electrode damage. Prolonged electrical erosion from sparks or chemical corrosion from combustion gases can cause electrode breakage or detachment, preventing sparking. Low insulation resistance of the spark plug. This reduces the ignition voltage applied to the spark gap, weakening the spark or completely disabling the ignition function. Short circuit in high-voltage wires. If the high-voltage ignition wire from the ignition coil to the distributor leaks, the entire engine may fail to start. If the wire from the distributor to the spark plug leaks, one cylinder's spark plug may not spark. Burnt platinum contacts. This can cause all spark plugs to fail to spark, preventing the engine from starting or running normally. Faulty spark plugs need to be replaced promptly. The replacement steps are as follows: Open the hood, lift the engine's plastic cover, remove the high-voltage wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one, checking for external debris like leaves or dust and cleaning thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, then use the socket to tighten further. Reinstall the high-voltage wires in the firing order and secure the cover. Spark plug replacement interval: Replace every 40,000-60,000 kilometers under normal maintenance conditions, but this may vary by brand and engine type. Refer to the owner's manual for specific recommendations.

4

2

Share

How many times can you retake the Driving Test Theory Exam (Subject 1)?

There is no limit to the number of retakes for the Driving Test Theory Exam (Subject 1). On the same day, you can retake it once. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," candidates can take the Subject 1 exam twice on the same day. If you fail the first attempt, you can retake it for free the second time. If you still fail the second attempt, the Subject 1 exam for that session will be terminated, and you can only schedule another exam after ten days. Subject 1, also known as the Theory Exam or Driver Theory Test, is part of the motor vehicle driving license assessment. The exam covers theoretical driving knowledge, road safety laws and regulations, local regulations, and other related topics. The test is conducted on a computer with a time limit of 45 minutes. To pass the Subject 1 exam, you need a score of 90 out of 100. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point. If you answer 11 questions incorrectly during the exam, the system will automatically submit the test and end the session. Subject 1 exam content includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Exam precautions for Subject 1: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the screen, and store personal belongings in lockers before entering the exam room. Upon entering, verify your identity at the assigned station and begin the exam. Ensure the camera is aligned with you and follow exam rules. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After finishing, queue to collect your score report and sign it—unsigned reports are invalid. There is no limit to the number of scheduling attempts for the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you skip the retake or fail it, the exam session ends, and you must reschedule. In contrast, Subject 2 and Subject 3 have only five exam attempts. Scheduling for Subject 2 and Subject 3 must be done after ten days. If you fail the Subject 3 Safe Driving Knowledge Test, your previously passed road driving skills test results remain valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4, though this term is not officially recognized in regulations (i.e., the Ministry of Public Security Order No. 123).

7

2

Share

Why can't Che Che Hu Hang connect?

It needs to be reset. It's probably a software issue or a problem with the phone and the dashcam. Here is some relevant information about car navigation: 1. Concept: A car navigation device is a driving assistance tool that helps users accurately locate their current position, calculates the route based on the set destination, and guides users to their destination through map display and voice prompts. 2. Operating Principle: The operation of a car navigation device mainly relies on the Global Positioning System (GPS). The car navigation device is mainly composed of a chip, antenna, processor, memory, and screen.

17

3

Share

What do crawl and mts mean on a car?

All-terrain system and low-speed cruise control buttons. Below is a partial introduction about cruise control: 1. Introduction: Cruise control is used to maintain a constant speed for the vehicle. Once the car is set to cruise mode, the engine's fuel supply is controlled by the computer, which continuously adjusts the fuel supply based on road conditions and the vehicle's driving resistance to maintain the set speed without throttle operation, reducing driver fatigue and unnecessary speed changes, thereby saving fuel. 2. Cancellation: Generally, cruise control is automatically deactivated when the driver presses the brake pedal or clutch.

11

5

Share

How to Reset the Oil Service for Maxus G50?

What is the speed limit on a three-lane highway?

What kind of oil does a generator use?

What problems will occur when a car's spark plugs burn out?

How many times can you retake the Driving Test Theory Exam (Subject 1)?

Why can't Che Che Hu Hang connect?

What do crawl and mts mean on a car?

What happens if you miss the scheduled Subject 1 test?

How many points are deducted for gear mismatch in Subject 3?

What is the Automotive Engine Oil Grade Reference Chart?

What is the fuel tank capacity of the 9.5th generation Accord?