How to reset the oil maintenance reminder on the Lynk & Co 01?
3 Answers
Method to reset the oil maintenance reminder on the Lynk & Co 01: Press and hold the reset button for more than 5 seconds to activate the reset mode, then press and hold the reset button again for more than 1 second to complete the reset. The main components of engine oil are base oil and additives. Base oil is the primary component of lubricating oil, determining its fundamental properties; additives can compensate for and improve the deficiencies in base oil performance, endowing it with certain new characteristics, making them an important part of lubricating oil. Below is an introduction to engine oil: 1. Engine oil is the lubricating oil used by engines, composed of base oil and additives. As a type of machinery, engines have common requirements for lubricating oil similar to general machinery, such as requiring appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. 2. The density of engine oil is approximately 0.91×10³ (kg/m³), and it can lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption and buffering for the engine.
I've encountered this issue myself before—it's really annoying when the service reminder keeps popping up on the dashboard right after maintenance. The actual operation is quite simple: First, don't start the engine, just turn the key to the ON position to power up the dashboard. Then, locate the multifunction button with an arrow on the steering wheel, press and hold it to navigate to the remaining mileage display menu. At this point, long-press the OK button without releasing it. After about five seconds, when you see the wrench icon start flashing, let go. Finally, press the OK button once more to complete the reset. Remember, if the car is still powered on, make sure to turn off all power-consuming devices like the air conditioning and multimedia system before resetting. Once the reset is successful, start the car and drive for a while, and that pesky service reminder should disappear.
Just helped a friend reset the oil maintenance reminder on his Lynk & Co 01. It's not difficult but must follow the steps. Get in the car, close the door, press the brake pedal without starting the engine, then press the start button twice to light up the instrument panel. On the left side of the steering wheel, there's an arrow button to cycle through the display menu - find the oil life percentage interface. Then press and hold the OK button for seven seconds while watching for the wrench symbol to flash on the instrument panel. Release and quickly press the OK button once more. After completing these steps, start the engine to check - if the maintenance reminder disappears, the reset was successful. Friendly reminder: Don't rush this operation. Once I successfully reset it while waiting to pay at a car wash.
