How to reset the oil maintenance light on the Volkswagen Tiguan?
2 Answers
The method to reset the oil maintenance light on the Volkswagen Tiguan is: 1. Turn off the ignition switch and shut down the engine; 2. Press and hold the right button (reset button) on the instrument panel with your left hand while turning on the ignition switch; 3. Continue holding the reset button with your left hand until the maintenance light enters the reset mode, then release the right button (reset button); 4. Within 20 seconds of releasing the right button, press the left menu time setting button once to confirm the reset. The Volkswagen Tiguan is a compact SUV with dimensions of 4506mm in length, 1809mm in width, 1685mm in height, a wheelbase of 2684mm, and a body type of a 5-door, 5-seat SUV.
As a seasoned driver, I've been driving the Tiguan for over a decade and often reset the maintenance light myself. The method is quite simple: First, turn off the engine and remove the key. Look for the small button labeled '0.0' or 'RESET' on the dashboard and hold it down. Then, turn the ignition to the ACC position without starting the engine, and wait a few seconds. Watch the dashboard—the maintenance reminder will start flashing or show a confirmation message. I usually wait until it displays a successful reset before releasing the button. This turns off the light, and it's pretty hassle-free. I recommend doing this regularly because if the light stays on, it might give false reminders about maintenance timing. If you forget the actual maintenance, the engine could suffer damage. Last time, my light was on for a week before I reset it, and I noticed the oil was a bit low—I changed it in time to avoid issues. Newer models might have different procedures, so it's best to check the manual first to confirm the steps. I'm used to doing it myself—it saves money and gives peace of mind—but make sure you don’t press the wrong button to avoid accidentally triggering other systems.
