How to Reset the Oil Maintenance Light on Buick Verano?
2 Answers
Method to reset the oil maintenance light on Buick Verano: 1. Always remember to turn off the engine before maintenance. 2. Set the ignition switch to the ignition power mode position. 3. Use the selection button on the right side of the multifunction steering wheel to navigate to the "Remaining Oil Life" menu interface. 4. Press and hold the "√" (OK/confirm) button for several seconds. 5. Reset the oil life to 100%. 6. Turn off the ignition switch to complete the reset, and the maintenance light prompt will disappear. Introduction to Buick Verano: 1. Exterior: The new grille features a dark ripple pattern with elongated chrome wing-shaped trim on both sides of the logo, creating a trendy and dynamic visual effect. 2. Configuration: The mid-to-high-end versions of the new car will be equipped with LED headlights, suede interior, automatic parking, sport mode selection, lane-keeping system, and an 8-inch LCD screen.
I previously helped a friend with the maintenance light issue on their Buick Verano. The lack of physical buttons in this car is quite troublesome, but the operation is actually not difficult. It can be done in three steps: First, power on the car without starting the engine—just press the start button while holding the brake until the dashboard lights up completely. Then, locate the five-way control button on the right side of the steering wheel, press the left directional button to navigate to the oil life interface on the dashboard. Finally, press and hold the central √ confirmation button for about five seconds until the percentage jumps to 100%—that means it's successful. Remember not to reset it randomly before changing the oil, or the maintenance cycle will get messed up. Also, if the light stays on after an oil change, it’s likely the reset operation wasn’t done properly. If you can’t figure it out yourself, a repair shop can fix it in three minutes using a computer.
