How to Reset the Oil Maintenance Indicator on the Vitara?
2 Answers
The method to reset the oil maintenance indicator on the Vitara is: 1. Turn on the ignition switch, briefly press the indicator selection button on the right side of the instrument panel to change the information display screen content to the remaining driving range display; 2. During the remaining driving range display, press and hold the indicator selection button for more than 5 seconds, and the lower area of the information display screen will show the word 'oil' for 2 seconds; 3. Release the indicator selection button and quickly press the button 5 times within 2 seconds, and this operation must be completed within 3 seconds; 4. After flashing 3 times, the indicator will turn off. Taking the 2016 Vitara as an example, it is a compact SUV with body dimensions of: length 4175mm, width 1775mm, height 1610mm, and a wheelbase of 2500mm.
Clearing the oil maintenance light on the Vitara is actually not difficult, I often do it myself. Sit in the driver's seat, don't start the engine, just turn the key to the ON position. Then look at the dashboard for that small mileage reset button, usually the TRIP or ODO button, hold it down for about 5 to 10 seconds, and wait until the indicator light flashes or turns off directly—that means success. Sometimes it may take a couple of tries due to button contact issues. I find that clearing it right after changing the new oil works best, as the system resets accurately to remind you of the next maintenance cycle. Don't forget, this light is a thoughtful design to remind you of regular maintenance to protect the engine. Doing it yourself saves the hassle of going to the repair shop and also saves money. Once you're familiar with it, the whole process takes less than a minute. Messing up the steps might cause the light to give false alerts, but after a few tries, you'll get the hang of it—it won't harm the car. Developing the habit of ensuring your car's health is important.
