How to reset the oil light on UY125?

1 Answers
KateLee
07/29/25 11:46pm
With the power turned off (black screen state) and the entire system without electricity, press and hold the SEL button with your left index finger for 5 seconds. Keep holding with your left index finger, then use your right hand to turn on the power to illuminate the dashboard. Continue holding for another 3 seconds with your left index finger, and the OIL-CHANGE indicator light will disappear.
Was this review help?
2
0
Share
More Forum Discussions

What causes the Changan Star to have no fuel, no spark, and no signal electricity?

Here are the reasons why the Changan Star has no fuel and no spark: No fuel or spark during startup: If there is no fuel injection or ignition during startup, it is necessary to check the crankshaft position sensor signal, as this vehicle integrates it inside the distributor. Inspect the sensor voltage signal and grounding for abnormalities, because the ECU will not control fuel injection and ignition if it does not receive a signal. Electrical circuit issues: Focus on testing the three wires of the sensor. A common fault is the power wire having no electricity; check the fuse and wiring. You can directly supply power to the sensor. If the engine can start, it proves the problem lies in the sensor circuit.
9
5
Share

What does it mean when the car battery light is on?

When the car battery light is on, it indicates an issue with the battery system. The battery indicator light on the car dashboard is not normally lit. If the battery light is on before starting the vehicle, it means the alternator is not generating electricity and the battery is not charging. After the car is started, when the alternator begins generating electricity and the battery is in a charging state, the battery indicator light will automatically turn off. Reasons for the car battery light being on include: 1. Loose alternator belt or loose battery terminals; 2. Abnormal alternator charging or charging system malfunction; 3. Faulty car wiring; 4. Battery malfunction.
9
1
Share

Where is the fuse box of the Verano located?

The fuse box of the Verano is located below the original air conditioning control panel. You need to remove the left and right protective panels around the gear shift lever. After removal, there are four T20 screws to be taken out. Then remove the cigarette lighter and the cover plate, and the fuse box will be inside. The Verano is a mid-size sports sedan under SAIC-GM Buick. The car has a length of 4723 mm, a width of 1802 mm, a height of 1466 mm, and a wheelbase of 2700 mm. In terms of appearance, the Verano is equipped with a winged chrome grille, winged LED automatic sensing headlights, winged LED taillights, 17-inch ten-spoke two-tone aluminum alloy sports wheels, a fastback roof, etc.
14
5
Share

What Causes Excessive Pressure in Car Air Conditioning?

Reasons for excessive pressure in car air conditioning: 1. Insufficient coolant flow or excessively high water temperature; 2. Excessive scaling or blockage in condenser copper tubes or fins, resulting in poor heat exchange efficiency; 3. Overcharged refrigerant, manifested by hot air at the exhaust outlet; 4. Presence of air in the system, requiring complete evacuation and refrigerant recharge; 5. Expansion valve failure, indicated by heavy condensation or frost on the low-pressure pipe. Check if the expansion valve is correctly installed. If properly installed, replacement is necessary. The car air conditioning system is designed to cool, heat, ventilate, and purify the air inside the vehicle, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
6
2
Share

What are the functions of front windshield film?

The functions of front windshield film: 1. Anti-explosion function. Since the front windshield of a car is tempered safety glass, the film can keep broken glass fragments in place after the glass shatters, preventing personal injury to passengers caused by flying glass; 2. UV protection and sun protection. The front windshield has a large heat-receiving area and is exposed to more UV radiation. The film can effectively block solar radiation and protect the health of drivers and passengers; 3. Anti-glare. Both sunlight and oncoming vehicle headlights at night can produce dazzling glare. The film can reduce external glaring light; 4. Thermal insulation function. The film can block part of the heat, making the air conditioning cooling effect more noticeable in summer.
9
0
Share

Does the Audi A6 have a rear wiper?

Audi A6 has a rear wiper. The functions of the wiper include: Helping the vehicle maintain a safe distance from the center line of the left lane; Assisting the driver in determining the position of the left wheels; Aiding in judging the position of the right wheels; Supporting the estimation of the distance between the vehicle's right side and the roadside; Facilitating parallel parking; Removing raindrops and dust attached to the vehicle's windshield. The method to replace the wiper is: Lift the wiper arm away from the windshield and keep it perpendicular to the windshield, then press the tab and remove the old wiper blade, finally insert the new wiper and rotate it until the hook snaps into place.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.