How to reset the oil inspection reminder on Audi Q5L?
3 Answers
Turn off the engine, press and hold the trip odometer reset button located below the tachometer. Turn the ignition to the ON position, release the trip odometer reset button, and the "SERVICE" indicator will appear on the display. Pull out the minute button on the clock, rotate it to the right, and the mileage will be displayed on the screen. Reset the reminder message. Turn the ignition to the ON position, and the "SERVICE" indicator will disappear.
Last time I helped a friend deal with the oil reminder on the Audi Q5L, and the process was actually quite simple. First, completely turn off the car and park it in a safe location. Then, press and hold the 0.0 button on the right side of the instrument panel without releasing it. Next, press the start button once to power on the car for self-check, but make sure not to press the brake pedal to start the engine. At this point, a prompt to reset the maintenance service will appear on the instrument panel. Continue holding the 0.0 button until the progress bar completes, then release your finger when the confirmation option appears. Finally, press the 0.0 button once more to confirm, and you're done. Take your time with the whole process—it's best to do it slowly. I recommend doing it during the day when the lighting is good to avoid misreading prompts and making mistakes. If it doesn’t work the first time, just try again—usually, it’s because the button was pressed too quickly or the power-on timing wasn’t right. This reminder is automatically calculated based on mileage, and after resetting, it will start recording the next maintenance cycle again.
When handling this oil reminder, it's crucial to follow proper procedures. First, turn off the engine and engage the parking brake to ensure the vehicle is completely stationary. Then, use your left hand to press and hold the 0.0 reset button below the instrument panel while gently pressing the start button with your right hand to power on the system. The instrument panel backlight will illuminate and display "Maintenance Service" text. Maintain pressure until the reset confirmation interface appears. Avoid touching steering wheel buttons during the entire process to prevent system recognition interference. Finally, release and lightly press the button once more to confirm, which will clear the maintenance reminder indicator. We recommend checking both the oil dipstick and system reminder status every three months to cultivate good maintenance habits. After resetting, it's advisable to start the vehicle to verify the warning light has disappeared, ensuring the operation is fully completed.
