How to reset the oil check due reminder on Audi A4 dashboard?

1 Answers
DiHector
07/29/25 10:37pm
Audi A4 oil check due reset method is as follows: 1. With the engine off, press and hold the trip odometer reset button located below the tachometer; 2. Turn the ignition to ON position while still holding the button, then release it when "SERVICE" appears on the display; 3. Pull out the minute button on the clock and rotate it clockwise until the mileage is displayed; 4. Turn off the engine to complete the reminder reset; 5. Turn the ignition to ON position again and the "SERVICE" message will disappear, indicating successful reset. Below is an introduction about Audi A4: 1. The Audi A4 (Audi-A4) is a B-segment vehicle manufactured by FAW-Volkswagen and launched in April 2003. As the first model to introduce long wheelbase and turbo concepts in its class, the A4L has maintained consistently strong sales from B5 to B8 generations. The new A4 model abandons the "teardrop" headlight design, adds quattro all-wheel drive option, and features more stylish sporty exterior with superior power and handling. The interior boasts exquisite craftsmanship, abundant tech features, and spacious cabin, making it highly practical among B-segment vehicles. 2. FAW Audi A4 is available in three engine displacements: 1.8T, 2.4 and 3.0. The 1.8T version includes four variants: manual base model, automatic base model, comfort model and technology premium model. The 2.4L version comes in three variants: comfort, comfort sport and comfort luxury. The 3.0L version has only one variant equipped with quattro permanent all-wheel drive system.
Was this review help?
3
5
Share
More Forum Discussions

Do I need to retake the test if I scored 80 in Subject Two?

Scoring 80 in Subject Two does not require a retake. Subject Two: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. For small vehicles (C1 and C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. Test Requirements: If you fail the first attempt at Subject Two, you are allowed one retake. If you do not take the retake or fail the retake, the test session ends, and the applicant must schedule a new test after ten days. Within the validity period of the driving skills test permit, the number of scheduled tests for Subject Two and Subject Three (road driving skills) must not exceed five times.
3
4
Share

Do You Need to Turn on AC When Using Heater in Winter?

You don't need to turn on AC when using heater in winter. Definition of AC switch: Simply put, the car AC switch is the cooling switch of the air conditioner. AC stands for "Air-conditioning", which means air conditioning device. This button controls the activation and deactivation of the compressor, and the car air conditioner's cooling function relies on the operation of the compressor. How AC works: After turning on the air vent in a car, the air conditioner will blow air because the blower in the air conditioning system starts working at this time, so there is air flow. However, the cooling system of the air conditioner has not yet activated because the air conditioning compressor hasn't started working. After turning on the AC switch, the onboard computer receives the signal from the AC switch, then the onboard computer sends a signal to the air conditioning compressor. Upon receiving the instruction, the air conditioning compressor begins to operate, and only then does the cooling function of the car air conditioner start working.
10
2
Share

What Does Energy Feedback Intensity Mean?

Energy feedback intensity is a type of specialized braking unit for frequency converters, primarily used in high-inertia, drag-type variable frequency speed control systems. It helps the motor feed the regenerative electrical energy generated during deceleration back into the power grid while assisting the system in achieving rapid braking functionality. The role of energy feedback: Energy feedback automatically detects the DC bus voltage of the frequency converter, inverts the DC voltage of the converter's DC link into an AC voltage with the same frequency and phase as the grid voltage, and connects it to the AC grid after multiple noise filtering stages, thereby achieving the effect of feeding energy back into the grid. The amount of energy feedback: The electrical energy fed back into the grid reaches over 97% of the generated energy, effectively saving power.
15
1
Share

What is the reason for the idle speed not dropping below 2000 RPM?

The reasons for the idle speed not dropping below 2000 RPM are as follows: Idle switch not closing: The rotation speed signal determines the fuel injection volume and injection timing, but the engine is operating under idle conditions with reduced air intake, leading to an overly rich air-fuel mixture and an increase in RPM. Faulty idle control valve: When the idle speed exceeds the set RPM, the ECU commands the idle control valve to reduce the air intake by closing the bypass channel, thereby lowering the engine speed. Issues such as sticking due to oil contamination, carbon buildup, or incomplete throttle closure can prevent the ECU from properly adjusting the idle speed, resulting in unstable idling.
10
0
Share

Do the Tail Lights Illuminate When the Handbrake is Engaged?

Engaging the handbrake does not cause the tail lights to illuminate. Reasons why the handbrake does not trigger the brake lights: The handbrake mechanism lacks power wiring, making it incapable of controlling the brake lights. Moreover, it doesn't even have a brake light switch. The handbrake operates via a steel cable connected to the rear brake shoes to apply braking force to the vehicle. Function of brake lights: Brake lights are typically installed at the rear of the vehicle, featuring red-colored lenses with penetrating light sources. This design ensures that following vehicles can detect when the leading vehicle is braking under low visibility conditions, thereby helping to prevent rear-end collisions. Their working principle involves electrical current passing through a fuse to the brake switch. When the brake pedal is depressed, the switch closes, sending power to two brake lights and one high-mounted brake light, completing the circuit through the negative wire connected to the vehicle body.
6
0
Share

Is it normal for the temperature gauge to exceed halfway?

The temperature gauge exceeding halfway is abnormal and indicates an overheating condition. Below are the steps to handle an overheating car temperature gauge: Find a place to park: First, find a safe and shady place to park, let the vehicle idle without turning off the engine. Open the radiator cap: Then open the hood, wait for the temperature to drop before loosening the radiator cap one notch, and wait for the internal steam pressure to fully release before opening it completely. Check components: Inspect the liquid in the radiator and the fan for any abnormalities, and check the radiator hoses for leaks and whether the coolant is sufficient. If there is no coolant in the car, you can temporarily use mineral water as a substitute. If the issue is caused by a faulty water pump, thermostat, etc., seek assistance as soon as possible.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.