How to reset the oil change reminder on the dashboard?

1 Answers
Marc
07/24/25 7:31pm
Method to clear the oil change reminder: Press and hold the minute button next to the dashboard to clear it. Here are some related details: 1. Engine oil serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing against leaks, rust and corrosion prevention, as well as shock absorption, all of which protect the engine. 2. Engine oil, or engine lubricant, is a substance enhanced with additives in base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. 3. The main functions of engine oil are to reduce friction and wear on moving parts, and to clean sludge (one of the functions of dispersants) and varnish (function of detergents) from the engine.
Was this review help?
1
5
Share
More Forum Discussions

What does 2rs bearing mean?

2rs represents the sealing method of the bearing. The basic dimensions of the bearings are the same. rs represents rubber seal. 2rs means double-sided rubber seal. Additional information: 1. Function: To compare the load capacity of bearings against pitting, the rated life of a bearing is defined as the maximum load it can withstand when its rated life reaches one million revolutions (106). That is, under the rated dynamic load C, the bearing has a 90% reliability of operating for one million revolutions (106) without pitting failure. The higher the C value, the greater the load capacity. 2. Differences: Due to variations in manufacturing precision and material uniformity, even bearings of the same material and size from the same batch may have different lifespans under identical working conditions. If the statistical lifespan is taken as 1 unit, the longest relative lifespan is 4 units, and the shortest is 0.1-0.2 units. The ratio between the longest and shortest lifespans is 20-40 times. The number of revolutions or hours that 90% of bearings can endure without pitting is called the rated life of the bearing.
20
4
Share

What is the reason why the Porsche horn does not rebound after being pressed?

The reason why the Porsche horn does not rebound after being pressed may be due to foreign objects causing jamming at the horn. Below is an introduction to the 2021 Turbo GT Porsche Cayenne: 1. Powertrain: Equipped with a 4.0L twin-turbocharged V8 engine and an 8-speed automatic manual transmission. 2. Body dimensions: Length, width, and height are 4942mm, 1995mm, and 1636mm respectively. The wheelbase is 2895mm. 3. Chassis: The drivetrain is front-engine four-wheel drive, with a multi-link independent front suspension and a multi-link independent rear suspension, featuring a unibody structure.
19
2
Share

What Causes BMW Cruise Control Failure?

BMW cruise control failure can be attributed to the following reasons: 1. ACC sensor malfunction: Damaged ACC sensor, dirty ACC sensor, damaged plastic cover in front of the ACC sensor, or external interference with the ACC sensor's radar signal. 2. Control unit internal or wiring failure: If there is an issue within the control unit or a fault in the connecting wiring, the signal cannot be transmitted. 3. Wheel speed sensor: If the cruise control system failure warning appears alongside alerts related to DSC, ABS, or RPA, it is highly likely due to poor performance of the wheel speed sensor.
18
3
Share

Why does Audi have a strong interior odor?

Audi cars have interior odors due to emissions from leather, adhesives, plastic components, etc. If the odor is strong in a newly purchased car, it is recommended to place some activated charcoal bags inside the vehicle and frequently ventilate by driving, which can reduce harm to the human body. Relevant information about Audi is as follows: 1. Introduction One: Audi is a German automobile manufacturer. Many Audi models have been locally produced in China, including the A3, A4L, A6L, Q5L, Q3, Q2L, A6L, A7L, etc. The Q5L is a midsize SUV from Audi, with dimensions of 4770mm in length, 1893mm in width, and 1667mm in height, and a wheelbase of 2907mm. 2. Introduction Two: In terms of power, this vehicle uses two engines: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. The low-power 2.0-liter turbocharged engine delivers 190 horsepower and a maximum torque of 320 Nm, featuring hybrid injection technology and an aluminum cylinder head with an iron cylinder block. 3. Introduction Three: The high-power 2.0-liter turbocharged engine delivers 252 horsepower and a maximum torque of 370 Nm, equipped with direct injection technology and an aluminum cylinder head with an iron cylinder block. Both engines are paired with a 7-speed dual-clutch transmission, which enhances gear shifting speed and transmission efficiency.
16
2
Share

How many hours can you drive in 24 hours?

In a 24-hour period, the cumulative driving time must not exceed 8 hours. Continuous daytime driving should not exceed 4 hours, and continuous nighttime driving should not exceed 2 hours, with each rest stop lasting no less than 20 minutes. Additional information is as follows: Relevant laws: According to the "Road Passenger Transport Enterprise Safety Management Regulations," continuous daytime driving must not exceed 4 hours, and continuous nighttime driving must not exceed 2 hours, with each rest stop lasting no less than 20 minutes; cumulative driving time within 24 hours must not exceed 8 hours; cumulative driving time over any continuous 7-day period must not exceed 44 hours, with mandatory rest periods; passenger vehicles are prohibited from driving on Class III and below mountainous roads that do not meet safety conditions at night; long-distance passenger vehicles must cease operations between 2:00 AM and 5:00 AM or implement relay transport; passenger vehicles operating fixed routes such as airport and high-speed rail shuttles, as well as short-distance transfers with single-trip distances under 100 kilometers, are exempt from the 2:00 AM to 5:00 AM driving restrictions, provided safety is ensured.
14
4
Share

Are There Any Requirements for Shoes When Driving?

There are requirements for shoes when driving. Here are the relevant details: 1. Lightweight: Heavy shoes, such as outdoor hiking boots, are not light and flexible enough. In an emergency, they may prevent timely and precise reactions. 2. Good fit with the foot: It is important to note that sports shoes with air cushions or airbags in the soles are also unsuitable for driving, as they prevent the foot from fully sensing the pressure on the pedals. 3. High friction: The soles should not be too smooth, as this would be similar to driving barefoot. Shoes with greater friction ensure better grip between the soles and the pedals.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.