How to reset the oil change reminder on Honda Haoying?

[DelEthan]

To reset the oil change reminder on Honda Haoying, follow these steps: 1. Press and hold the A button while stepping on the brake pedal; 2. Do not start the engine, but ensure the vehicle's power is turned on; 3. The dashboard characters or the entire display will flash; 4. Continue holding the reset button A until ellipsis (...) appears on the display; 5. Release the brake pedal and the A button simultaneously; 6. Turn the ignition switch to the off position. Taking the Honda Haoying 2021 240TURBO Manual 2WD Elite Edition as an example: This vehicle is manufactured by GAC Honda, classified as a compact SUV, and features a turbocharged intake system.

[LukeAnn]

Last week I just helped my brother solve the oil indicator light issue on his Honda Breeze. The procedure was actually quite simple: First, sit in the car without pressing the brake, then press the start button twice to power up the dashboard without starting the engine. Next, locate the small arrow button at the lower right corner of the dashboard, press and hold it for about 10 seconds until the maintenance menu appears on the screen. Then use the button to navigate to the 'Engine Oil' option, press and hold for another 3 seconds until the progress bar completes. However, I should remind you that there might be slight differences between the 2019 and 2022 models - the newer version may require accessing the settings through steering wheel buttons. If you fail after three attempts, I recommend visiting the 4S dealership to have them reset it with their computer system, saving yourself the trouble.

[ThomasLee]

I know this oil reset procedure like the back of my hand! First, sit in the driver's seat and put the car in accessory mode (just press the start button twice without stepping on the brake). Here's the key: locate that small black button with two vertical lines on the right side of the instrument cluster, press and hold it firmly for about 7-8 seconds until the screen flashes. Then release and quickly press it once to enter the maintenance submenu. Use short presses to navigate to the oil option, then long-press the confirmation button until you see the 'Reset Complete' message. The whole process takes less than 20 seconds, but remember you must perform it within 30 days after the warning light first comes on - otherwise the system will lock and require professional equipment to unlock.

[VonAutumn]

The key to resetting the warning light is locating that reset button. The button position varies across different model years of the Honda Breeze: for the 2017 model, it's on the right protrusion of the instrument panel; the 2019 model moved it below the left side of the steering wheel; and the 2021 version integrated it into the central control screen menu. The universal method is: power on without starting the engine → locate the TRIP or SET button → hold until the screen goes black → release and immediately hold again for 5 seconds. Before operating, it's advisable to check the dipstick—if the engine oil appears black, avoid rushing to reset as it may harm the engine. If you can't find the button, refer to around page 125 of the owner's manual for illustrated instructions.

[MadelynRose]

Actually, it can be solved in just four steps: 1. Press the ignition switch twice when the engine is completely off. 2. Do not press the accelerator or brake. 3. Quickly hold down the ODO button on the dashboard for ten seconds. 4. When the indicator light starts flashing, press and hold for three seconds to confirm. The most troublesome situation I encountered was when the button had poor contact during rainy days, and I only succeeded after drying my hands before operating. Here's an additional fun fact: If you recently changed the oil but forgot to reset it, the car will automatically accumulate mileage. If it exceeds 6,000 kilometers, the light will turn red and stay on constantly. At that point, you'll need a professional diagnostic tool to clear it.

[ODawson]

I just dealt with this issue on my own Honda Breeze. There are three key points to note during the operation: ensure the transmission is in P gear, do not touch the brake pedal throughout the process, and hold the button without releasing it. For older models of the Breeze, you need to long-press the small black button on the dashboard until the wrench icon disappears. For newer models, select Vehicle Maintenance → Reset Engine Oil Data in the system menu. Remember to start the car and drive for about five minutes after the operation to confirm that the light does not come back on. Actually, this reminder is quite smartly designed—it's not just a simple countdown but also takes into account the actual load of the engine, so don't delay dealing with it for too long. Resetting after maintenance is the best option.