How to Reset the Odometer on Volkswagen Lavida?

Is it possible to conduct vehicle inspection in a different location now?

Except for large passenger buses and school buses, which cannot be inspected in a different location, all other vehicles can undergo inspection in a different location. Currently, the traffic management authorities have fully implemented cross-province inspection for small cars, trucks, and medium-sized passenger vehicles. Applicants can directly conduct inspections in provinces other than the vehicle registration location and apply for the inspection qualification mark without needing to go through the entrusted inspection procedure. Large passenger buses and school buses cannot be inspected in a different location and must return to the vehicle registration location for inspection. Inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection within 6 years. For vehicles over 6 years but less than 10 years, inspection is required every two years; for vehicles over 10 years but less than 15 years, annual inspection is required; for vehicles over 15 years, inspection is required every 6 months. Operational passenger vehicles require annual inspection within 5 years; for vehicles over 5 years, inspection is required every 6 months. Trucks and large and medium-sized non-operational passenger vehicles require annual inspection within 10 years; for vehicles over 10 years, inspection is required every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspection at any inspection site. Inspection precautions: Vehicles that fail the inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not participate in the inspection without reason or fail the inspection are not allowed to drive on the road and cannot be transferred. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.

19

5

Share

Which One is the Accelerator and Which One is the Brake?

For modern automatic transmission vehicles, the pedal on the far right is the accelerator, which should be pressed when acceleration is needed. The second pedal closer to the right is the brake pedal, used for deceleration or stopping. Some automatic cars may have an additional pedal on the far left, which is a foot-operated parking brake switch. Here are some related points: 1. The dangers of using the left foot for braking and the right foot for the accelerator: While this method prevents confusion between the accelerator and brake, it is not a good driving habit. Although braking with the left foot can be more tiring, it offers faster reaction times than the right foot—sometimes a difference of just 0.2 seconds can prevent a collision. However, in stressful situations, some drivers, especially beginners, may press both pedals simultaneously. 2. The correct approach: Find a proper driving posture for operating the accelerator and brake. Position the heel of your right foot between the accelerator and brake pedals as a pivot point. Then, use your toes to check if you can reach both pedals without moving your heel. If possible, this posture is correct. The advantage is that in emergencies, you can locate the brake pedal quickly, avoiding accidental presses. Additionally, during normal driving, it’s safest to keep your foot on the brake pedal when not accelerating. This habit ensures the safest way to operate the accelerator.

1

5

Share

What does a 6-speed wet dual-clutch mean?

6-speed wet dual-clutch refers to a dual-clutch transmission with 6 forward gears. Here is more information: 1. Characteristics of wet dual-clutch transmission. It consists of two multi-plate clutches, one large and one small, coaxially installed together in a sealed oil chamber filled with hydraulic oil. The wet clutch structure offers better adjustment capability and higher heat resistance, enabling it to transmit greater torque. 2. Classification of automotive transmissions. Automotive transmissions can be divided into two main categories: manual transmissions and automatic transmissions, which correspond to the difference between manual and automatic gears. Automatic transmissions can be further subdivided into four types: AT (automatic transmission), AMT (semi-automatic transmission), DTC (dual-clutch transmission), and CVT (continuously variable transmission). The 6-speed dual-clutch is also a type of automatic transmission structure.

17

3

Share

How to Remove the Air Filter on a Porsche 718?

Here is the method for removing the air filter on a Porsche 718: 1. Open the engine hood and secure the support rod, then locate the position of the air filter. 2. Use a screwdriver to loosen the screws around the air filter cover, being careful not to let the screws or clips fall into the engine compartment. 3. After opening the cover, remove the air filter element, paying attention to the direction in which the filter is placed when removing it. Below is some related information about the Porsche 718: 1. Power: The Porsche 718 is a mid-engine sports car that uses two engines, a 2.0-liter turbocharged engine and a 2.5-liter turbocharged engine. 2. Suspension: Both the front and rear suspensions of the Porsche 718 use MacPherson independent suspension. 3. Dimensions: The length, width, and height of the car are 4379mm, 1801mm, and 1276mm respectively, with a wheelbase of 2475mm.

9

1

Share

Do New Cars Not Need a Break-in Period?

New cars definitely require a break-in period. Even for the same model, manufactured under identical processes and standards with the same components, each vehicle will still have assembly variations due to different environments, timing, and temperatures. Manufacturing and assembly tolerances are unavoidable, so the break-in process aims to minimize discrepancies between moving parts and bring the vehicle to its optimal operating condition. Here's relevant information: 1. Speed during break-in: Generally, it's advisable not to exceed 80 km/h within the first 500 km, 100 km/h at 1,000 km, and 120 km/h between 1,000-1,500 km to facilitate engine break-in. 2. Engine RPM: The break-in isn't solely about speed but also involves engine revolutions. Typically, maintaining 2,000-4,000 RPM during this period is appropriate. Consistently driving at extremely low speeds or undertaking long high-speed journeys during break-in offers little benefit and may even cause component stress cracks or other detrimental effects.

9

1

Share

How is the power of the Corolla Hybrid?

The Corolla Hybrid is equipped with an upgraded 1.8L Atkinson cycle engine. Thanks to the electric motor, it not only maintains driving performance but also improves actual fuel economy. The hybrid system allows the gasoline engine and electric motor to work in synergy, fully utilizing the advantages of each power source and efficiently controlling output distribution, thereby achieving high acceleration performance, quietness, low fuel consumption, and low emissions simultaneously. Overall, the power performance is quite good. Here are the specific details about the new Corolla: 1. Meaning of Corolla: The new Corolla, also known as New-Corolla, features a trapezoidal front-face design in its 11th generation, aiming to bring happiness and joy to everyone in the world. 2. Exterior Design: The 11th-generation Corolla adopts a trapezoidal front-face architecture, with the Toyota emblem at the center. The front grille and headlights extend to both sides and slightly curve upward, fully embodying Toyota's Keen-look family design style, delivering a striking and sharp appearance. 3. Dimensions: To meet the space demands of Chinese consumers, the new Corolla's wheelbase has been extended to 2700mm, and the rear legroom has been increased by 75mm to 960mm, providing more spacious seating for rear passengers. 4. Powertrain: An 8-speed S-CVT transmission with a manual mode, specifically developed for the Chinese market, offers a smoother driving experience for the new Corolla. It also introduces a sport mode for enhanced driving pleasure. Additionally, the upgraded dual VVT-i engine and F1 aerodynamic guide fin design further improve fuel efficiency.

12

0

Share

How to Reset the Odometer on Volkswagen Lavida?

Is it possible to conduct vehicle inspection in a different location now?

Which One is the Accelerator and Which One is the Brake?

What does a 6-speed wet dual-clutch mean?

How to Remove the Air Filter on a Porsche 718?

Do New Cars Not Need a Break-in Period?

How is the power of the Corolla Hybrid?

What does EV function restricted mean?

Can a driver's license be renewed across provinces?

What should be paid attention to when parking?

What is the maximum allowed time for a vehicle to miss inspection?