How to Reset the Mitsubishi Eclipse Cross Maintenance Light?

Why does the car cross the line when exiting from parallel parking?

It is usually caused by reversing into the parking space too late. When the entire vehicle enters the space, it can no longer be straightened, resulting in directly crossing the right boundary line. Below are relevant explanations about parallel parking: 1. Traditional parallel parking: Four poles were placed on the ground to symbolize the four corners of the parking space. Whether the vehicle successfully entered the space and whether it touched these four poles was one of the criteria. 2. After the implementation of new traffic regulations: Parallel parking no longer uses poles, but instead adopts ground markings as the boundaries of the parking space. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. Drive the vehicle to a position parallel to the parking space, then reverse into the space to the right rear without any pauses. As long as the vehicle is parked within this range without crossing the boundary lines, it is considered a pass.

2

3

Share

Should the Nail in the Tire Be Pulled Out?

It is recommended not to pull out the nail by yourself when the tire is punctured by a nail, because the tire is in a rolling state while driving, and the nail may not be vertically inserted into the tire. If the nail is pulled out without timely repair, it may cause the tire to become abnormal and unrepairable. After the tire is punctured by a nail, the car can temporarily use the spare tire for driving, and then find a professional tire repair shop to fix the tire before switching back to continue using it. The following are the functions of car tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; work with the car suspension to mitigate the impact during driving and dampen the resulting vibrations. 3. Prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.

14

1

Share

What are the common reasons for frequent water shortage in diesel vehicles?

Frequent water shortage indicates a leak in the cooling system or a slight head gasket failure. It may also be caused by excessively high coolant temperature leading to system water shortage. Below is relevant information about diesel vehicles: 1. Precautions: Pay attention to excessively high engine water temperature. Park the vehicle in a ventilated and shaded area. Then open the engine hood and wait for the coolant temperature to drop. If it is necessary to open immediately, use a large towel soaked in water to cover the antifreeze reservoir cap before attempting to slowly open it. When steam emerges, quickly move your hand away and wait until the steam completely dissipates before finally opening the cap to add coolant. 2. Scrap time: The vehicle will be mandatorily scrapped when the mileage reaches 600,000 kilometers, but the specific condition of the vehicle should also be considered. For commercial vehicles, the scrap time is 8 years. Each vehicle has its own scrap period from the time of purchase, which is a system designated by the national transportation department, specifying safety inspection regulations based on the number of seats and usage period during the vehicle's service life.

9

5

Share

How to Activate Cruise Control on Mercedes-Benz GLC260?

Mercedes-Benz GLC260 cruise control activation steps are as follows: Operation Explanation: Open the driver's side door of the Mercedes-Benz GLC260. Depress the brake pedal of the Mercedes-Benz GLC260 to prepare for engine start. Press the one-touch start button of the Mercedes-Benz GLC260 to start the engine. The instrument panel of the Mercedes-Benz GLC260 lights up, and the vehicle's power is fully connected. Press the cruise control activation button located next to the gearshift lever of the Mercedes-Benz GLC260. When the speed exceeds 60 mph, the cruise control system automatically activates. Cruise Control Explanation: The high-speed cruise control of the Mercedes-Benz GLC260, also known as cruise control, is located next to the gearshift lever. It utilizes a cruise control device, allowing the driver to avoid controlling the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed fluctuations, thereby saving fuel.

5

4

Share

Why is the car suddenly consuming more fuel?

There are several reasons why a car may suddenly consume more fuel, such as incorrect fuel grade, poor fuel line flow, spark plug gaps being too large or too small, incorrect ignition timing, excessive clearance between engine cylinder liners and piston rings, excessive valve clearance, and other issues. Generally, driving in winter consumes more fuel than in summer, and driving in urban areas consumes more fuel than on highways. Here is a method to calculate a car's fuel consumption: Calculate fuel consumption based on the relationship between distance and speed. 1. Fill the car with fuel until the pump automatically stops (jump gun), and record the current mileage. 2. The next time you refuel, fill it until the pump automatically stops again, and record the amount of fuel added. 3. Calculate the distance traveled since the last refueling and use the relationship between distance and speed to determine the fuel consumption.

19

1

Share

Can the car still be driven if the differential is leaking oil?

If the front differential is leaking oil, the car should not be driven and needs to be repaired promptly. Below is an introduction to the differential: 1. Introduction: The automotive differential is a mechanism that allows the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right half-shaft gears, two planetary gears, and a gear carrier. 2. Function: Its purpose is to enable the left and right wheels to roll at different speeds when the car is turning or driving on uneven roads, ensuring that both drive wheels perform pure rolling motion. 3. Objective: The differential is installed to adjust the speed difference between the left and right wheels. In four-wheel drive systems, to drive all four wheels, they must be connected. If all four wheels were mechanically linked, the car could not rotate at the same speed when driving on curves. To allow the car to maintain a relatively consistent rotational speed during curve driving, a center differential is added to adjust the speed difference between the front and rear wheels.

19

4

Share

How to Reset the Mitsubishi Eclipse Cross Maintenance Light?

Why does the car cross the line when exiting from parallel parking?

Should the Nail in the Tire Be Pulled Out?

What are the common reasons for frequent water shortage in diesel vehicles?

How to Activate Cruise Control on Mercedes-Benz GLC260?

Why is the car suddenly consuming more fuel?

Can the car still be driven if the differential is leaking oil?

What Causes the Left Side to Be Narrower Than the Right Side in Parallel Parking?

What adhesive should be used for a detached car roof liner?

What are the effects of a damaged pressure bearing?

How to Solve the Problem of Abnormal Noise in New Car Brakes?