How to reset the maintenance wrench on Zotye T600?
3 Answers
Turn on the ignition switch, hold down the "Reset Button" with one hand, and turn off the ignition switch with the other hand. Keep holding the "Reset Button" until the clock and trip meter on the dashboard completely disappear, then release the button. Press and hold the "Reset Button" again with one hand, then turn on the ignition switch anew. Do not release the "Reset Button" during this process. Turn on the ignition switch again or start the vehicle to check if the reset was successful.
The key to eliminating the maintenance wrench light on the Zotye T600 is to reset the dashboard maintenance reminder. Having driven this car for years, I often use the simplest method: sit in the driver's seat, turn the key to the ACC position without ignition, locate the TRIP button or the small mileage reset button on the dashboard, hold it down, then turn off the key, wait three seconds, and turn it back on—the wrench light will disappear. If it doesn't work the first time, try a couple more times. Videos shared by car enthusiasts online have verified this trick works. The maintenance light comes on to remind you to change the oil or perform maintenance, so make sure the service is completed before resetting the light. Otherwise, simply turning off the light is useless and may cause you to miss the maintenance cycle. Don't be nervous during the actual operation—I got the hang of it after doing it a few times myself, saving a trip to the dealership. Remember to turn off the engine before operating to avoid accidentally triggering other systems.
To clear the maintenance reminder light on the Zotye T600, you need to reset the ECU data through the instrument panel settings. The method is simple: turn the key to the ON position without starting the engine, then press and hold the TRIP button near the steering wheel for more than five seconds with your finger, and finally turn off the key and restart the vehicle to turn off the light. The underlying logic is that the computer records the mileage exceeding the limit and triggers an alarm, and resetting is to reset this timer. If it doesn't work, check if the button is malfunctioning or if there is a wiring contact issue. A more complex method is to use an OBD diagnostic tool to scan and reset the code. Maintenance interval management is important; if the light is not cleared, it will stay on and distract you, but I recommend prioritizing ensuring the vehicle's actual maintenance is completed before dealing with the indicator light. Safe driving is always the top priority.
