How to reset the maintenance wrench on Zotye T600?

1 Answers
DelElliot
07/29/25 6:24pm
The method to reset the maintenance wrench on Zotye T600 is: 1. With the engine off, press the two cylindrical buttons under the instrument panel and turn off the ignition; 2. Then start the ignition again, and after about 10 seconds, the wrench symbol will be reset. Taking the 2019 Zotye T600 as an example, its body dimensions are: length 4648mm, width 1893mm, height 1686mm, with a wheelbase of 2807mm. The 2019 Zotye T600 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 119kW and a maximum torque of 215Nm, paired with a 5-speed manual transmission.
Was this review help?
6
3
Share
More Forum Discussions

Why is the car air conditioning not cooling well?

Air conditioning not cooling most common fault points are: 1. Refrigerant leakage: The refrigerant in the air conditioning system has completely leaked out, resulting in no refrigerant, so the air conditioning does not cool. You can check whether the pipelines in the air conditioning system, the air conditioning pump, condenser, evaporator box and other components are damaged, leading to refrigerant leakage. Another inspection method is to add fluorescent agent while adding refrigerant. After using the vehicle for a week, use a special fluorescent lamp to check the air conditioning system. If there is a leakage point, it will light up, indicating that this component is damaged. 2. Internal damage to the air conditioning pump: This results in the inability to start the cooling effect. Generally, damage to the air conditioning pump will produce abnormal noise. So check the air conditioning pump, and if it is damaged, it needs to be replaced. 3. The condenser fins in the air conditioning system are too dirty: This causes the pressure and temperature in the air conditioning system to be too high. To protect the air conditioning system, the air conditioning pump stops working, and the air conditioning does not cool. You can use a high-pressure water gun to clean the condenser fins. After cleaning, use a high-pressure air gun to dry them.
20
4
Share

Should You Engage the Handbrake or Shift to P Gear First When Parking?

When parking, you can either shift to P gear first or engage the handbrake first. Below are the parking methods for automatic transmission vehicles: 1. Short-term parking: You can simply press the foot brake. 2. Long-term parking: Shift to N gear and engage the handbrake. The method of shifting to N gear and engaging the handbrake is suitable for situations where the traffic light has just turned red or the remaining time of the red light is long. Shifting to N gear cuts off the engine power, while engaging the handbrake prevents the vehicle from moving. Below are some extended notes on driving precautions for automatic transmission vehicles: 1. Starting: Accelerate gently, shift to P gear or N gear when starting, and avoid coasting in neutral. 2. Waiting at traffic lights: Shift back to N gear for brief stops, and shift to P gear when parking. 3. While driving: Do not shift into P gear. 4. When reversing: Ensure the vehicle is completely stopped before shifting to R gear to reverse.
12
0
Share

What to Do When Wuling Hongguang's Air Conditioning Has Poor Cooling Effect?

Here are the specific reasons and solutions for the poor cooling effect of Wuling Hongguang's air conditioning: 1. Insufficient or low refrigerant: This may be caused by a minor refrigerant leak. You can observe it through the sight glass on the dryer tank. When the air conditioning is running normally, if there are continuous, slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it means the refrigerant is severely insufficient. In this case, simply adding refrigerant will solve the problem. 2. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and a drop in compressor speed. This results in decreased delivery of compressed refrigerant, causing the car air conditioning to not cool properly. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it means the belt is too tight and should be loosened slightly. If tightening is ineffective or the belt shows signs of cracking, aging, or other damage, a new drive belt should be installed.
3
0
Share

Does the New Tiguan Have a Particulate Filter?

The New Tiguan does not have a particulate filter. However, the New Tiguan L is equipped with a particulate filter, which is installed in the engine emission system. It captures particulate emissions before they enter the atmosphere, and the captured particles are subsequently burned off during vehicle operation, effectively improving the vehicle's exhaust quality. Introduction to the Particulate Filter: A particulate filter is a ceramic filter installed in the diesel engine emission system, capable of reducing soot produced by diesel engines by more than 90%. The working principle of the particulate filter involves adsorbing carbon soot particles onto the filter. When the amount of adsorbed particles reaches a certain level, the carbon soot particles on the filter are burned off. Function of the Particulate Filter: The Gasoline Particulate Filter (GPF) is a ceramic filter installed in the gasoline engine emission system. It captures particulate emissions before they enter the atmosphere.
3
1
Share

What is a 7-Speed Dual Clutch Transmission?

7-speed dual clutch transmission is a dual-clutch transmission with seven forward gears. Also known as a 7-speed DCT, it uses a dry clutch. The 7-speed dual clutch transmission is a type of automatic transmission structure. Below is relevant information about dual-clutch transmissions: Advantages of dual-clutch transmissions: A dual-clutch transmission (DCT) differs from conventional automatic transmission systems. It combines the characteristics of both manual and automatic transmissions, offering the flexibility of a manual transmission and the comfort of an automatic transmission, while also providing uninterrupted power output. Precautions when using a dual-clutch transmission: Due to its fast gear-shifting speed, compact size, lightweight, and low energy consumption, some performance vehicles utilize dual-clutch transmissions. When experiencing a launch start, avoid pressing both the brake and accelerator pedals simultaneously for too long; quickly release the brake pedal. This is because the clutch generates significant heat during engagement, and the vehicle must start swiftly to allow the clutch to fully engage. If the driver presses both the accelerator and brake pedals simultaneously, the engine speed rises, the clutch moves to the preparatory position and attempts to engage. If the transmission detects that the vehicle hasn't started, the designed protection program will reduce the engine speed to a lower value to protect the transmission until the brake pedal is released. Dual-clutch transmissions do not have a torque converter. If operated incorrectly, the clutch may slip and overheat, causing unnecessary wear. The clutch only disengages when the brake pedal is pressed.
8
4
Share

What is the fuel tank capacity of the Buick Excelle in liters?

The fuel tank capacity of the Buick Excelle is 44 liters, which is the officially announced data. Owners who have purchased the Buick Excelle can also check this information on the vehicle's configuration sheet. The Buick Excelle uses 92-octane fuel, with a fuel consumption of 5.3 to 5.9L per 100 kilometers. A full tank of fuel can cover a distance of 746 to 830 kilometers. During daily driving, it is necessary to always pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.