How to reset the maintenance wrench on the 2020 Lingpai?
3 Answers
Turn off the ignition switch of the Lingpai, then press and hold the trip meter reset button on the dashboard. Turn the ignition switch on again, release the button, and then press and hold the ignition button. Wait until the Honda Lingpai display shows 0000.0, then release the button to reset the maintenance light. Here is additional information: Vehicle maintenance light: When the maintenance light comes on, it means the vehicle has reached a certain mileage and requires maintenance. If a red light resembling a wrench appears on the dashboard, it's time to service the vehicle. When the maintenance light comes on, first check if the vehicle has reached the scheduled maintenance time, and then proceed to reset the maintenance light.
I just bought a 2020 Honda Crider, and resetting the maintenance wrench light is actually quite simple. That day when the wrench icon appeared on the dashboard, I panicked thinking there was a major issue with the car, so I immediately checked the manual and asked friends. The method is to sit firmly in the car, turn the key to the ON position without starting the engine, then press and hold the Trip button on the right side of the dashboard for about 5 to 10 seconds, and the wrench symbol will disappear automatically. The first time I tried it, I hesitated a bit and pressed the button several times before succeeding. Now, after every maintenance, I habitually reset it to avoid distractions while driving. Remember, this is just a reminder light reset and shouldn't replace actual maintenance. To keep the car running smoothly, you still need to change the oil and perform inspections on time.
To reset the maintenance wrench on the 2020 Honda Crider, follow these steps: First, turn the ignition key to the ON position, but do not start the engine. Then locate the Trip reset button on the instrument panel, usually marked with a dot symbol. Press and hold it with your thumb for about 10 seconds until the wrench warning light disappears before releasing. After completion, start the vehicle to confirm if the indicator is completely gone. If there's no change, the button position might be incorrect or the system isn't responding - try driving a short distance and repeating the process. It's recommended to perform this reset immediately after maintenance to ensure driving safety. Similar buttons are universally compatible across other Honda models for convenient operation.
