How to reset the maintenance wrench on Chery Arrizo 7?
4 Answers
Method to reset the maintenance wrench on Chery Arrizo 7: 1. First, turn off the ignition switch of the Chery Arrizo 7. 2. Then press and hold the trip meter reset button on the Chery Arrizo 7 dashboard. 3. Next, turn on the ignition switch while keeping the button pressed (as in step 2). 4. Finally, when the Chery Arrizo 7 display shows 0000.0, immediately release the button. This will complete the maintenance light reset and clear the maintenance reminder wrench symbol.
I just helped my brother clear the maintenance reminder on his Arrizo 7 recently, and the operation was quite simple. First, sit in the driver's seat, insert the key but don't start the engine—just turn it to the power-on position where the dashboard lights up but the engine doesn't run. Then, look at the right side of the dashboard for a small cylindrical button, technically called the trip reset button. Press and hold it with your finger for about five seconds, and the entire dashboard display will refresh suddenly, turning off the maintenance reminder light. My brother's car is a 2015 model, and this method works perfectly. For newer models with touchscreens, you might need to find the vehicle status reset option in the central control settings, but the old-school mechanical button method is the most reliable. After resetting, remember to start the engine to check if it was successful, so you don't end up wasting your effort.
Experienced Chery Arrizo 7 owner here sharing tips. The maintenance reminder is just a small wrench icon, and the key to resetting it lies in entering engineering mode. First, power on without starting the engine, then here's the crucial part—hold down the TRIP toggle button on the left side of the steering wheel with your left hand, while simultaneously pressing the clock adjustment button under the instrument panel with your right hand. Hold both for about ten seconds until the dashboard suddenly dims and relights, and the wrench icon will disappear. Many cars have hidden functions with such button combinations—last time I reset mine, I also cleaned the throttle body, solving both the maintenance light and abnormal fuel consumption issues. For configurations with multi-function steering wheels, you might need to press the MODE button plus volume key combination instead.
A DIY fix that takes just two minutes. First, turn the key to the ON position and notice the wrench icon on the dashboard, right? Don't rush. Locate the small protruding button below the dashboard—that's the trip reset button. Press and hold it with your fingertip while using your other hand to turn the key to the OFF position. After holding for five seconds, turn the power back on, keeping the reset button pressed. You'll see the wrench icon blink three times before disappearing. This method works for pre-2016 Arrizo 7 models; newer versions have the maintenance reset option in the vehicle settings menu on the center display. For precision, use your phone's stopwatch during the process—holding the button too long may trigger the fuel consumption calibration mode, which could backfire.
