···
Log in / Register

How to Reset the Maintenance Wrench Light on Buick Encore?

3 Answers
StAlyssa
08/27/25 7:58am
Turn off the ignition switch to cut off the power supply to the car. Press and hold the buttons on the dashboard simultaneously, keeping both trip reset buttons pressed for more than 5 seconds. Turn the key to the second position (accessory mode) without starting the engine, and wait until all dashboard lights illuminate. This process typically takes about 10 seconds. Wait for the wrench light to go off. Once it's off, release both trip reset buttons. Turn off the ignition switch and then turn it back on to complete the maintenance reset.
Was this review help?
17
1
Share
MacTyler
09/09/25 6:42am
I've noticed the maintenance wrench light is quite common on the Buick Encore, and I've personally experienced it several times. To reset it, the method is straightforward: First, park the car and turn off the engine, ensuring it's completely shut down. Then, press and hold the TRIP button on the left side of the steering wheel without releasing it. Next, turn the key to the ACC or ON position (where the dashboard lights up but the engine doesn't start), and keep holding the button for about 5 to 10 seconds until the wrench icon disappears on its own. Note that this should only be done after the maintenance is completed; otherwise, it's just masking the problem. I recommend regularly checking the odometer and performing maintenance every 5,000 kilometers or so to extend the engine's lifespan. Always perform this operation after parking, never while driving—safety first.
Was this review help?
2
1
Share
Expand All
AdrielLee
10/23/25 7:34am
In my years of auto repair experience, resetting the maintenance reminder on the Buick Encore is quite simple. After turning off the engine, immediately press and hold the TRIP button on the steering wheel while turning the key to the second position (power on but engine off). Wait patiently for a few seconds until the wrench light disappears. However, always confirm the vehicle has received maintenance before resetting, as ignoring this warning may lead to aged engine oil or component wear, resulting in costlier and more time-consuming repairs. The key to keeping your car healthy is timely maintenance. Buick's thoughtful design with this reminder feature ensures you won't miss service intervals. The entire operation takes about one minute and is completely safe.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How to Deal with the Continuously Illuminated Tire Pressure Monitoring Light on Lavida?

Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system until the dashboard indicator light comes on. Wait for the system to confirm the storage of new parameters, and the tire pressure monitoring light will automatically turn off, completing the reset. Below are the specific methods to eliminate the tire pressure monitoring light: 1. First, turn off the engine, then turn on the power for vehicle self-inspection. Press and hold the tire pressure monitoring button on the right front side of the gear shift lever for about three seconds until you hear a "ding" sound. Release the button to eliminate the tire pressure warning light on the dashboard. 2. If the light cannot be eliminated, visit a Volkswagen after-sales service center. Have the staff check the tire pressure and related systems such as sensors. After confirming there are no faults, use a specialized decoder to clear the tire pressure warning light on the vehicle.
18
2
Share

What does the engine fault light EDC mean?

EDC fault light indicates that there is a problem with the engine electronic control system, reminding the owner to go to the repair shop for inspection and maintenance as soon as possible. Here is some information about EDC: 1. The full name of EDC is Electric-Diesel-Control, which means electronic control system for diesel injection; its task is to electronically control the fuel injection system to achieve real-time control of fuel injection quantity and timing according to operating conditions. 2. When EDC appears on the car dashboard, it indicates an engine fault. When the EDC fault light comes on, it means there is a problem with the engine.
7
0
Share

What is the principle of car tire pressure monitoring?

Car tire pressure monitoring principle depends on the type of monitoring device, specifically introduced as follows: 1. Direct tire pressure monitoring: Uses pressure sensors installed inside the tires to measure air pressure, and wireless transmitters to send pressure information from inside the tire to a central receiver module. 2. Indirect tire pressure monitoring: When tire pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller. By comparing rotational speed differences between tires, it achieves the purpose of monitoring tire pressure. 3. Functions of tire pressure monitoring: Prevent accidents; Extend tire service life.
9
1
Share

What to Do When the Car Key Won't Come Out?

When a car key won't come out, it's not necessarily a malfunction. There are two common scenarios: first, the key won't come out after turning off the engine; second, the key can't be turned after insertion. Here are the details: 1. Key won't come out after turning off the engine (common in automatic transmission models): In this case, the owner should check if there's any obstruction in the gear slot. Remove the obstruction, start the car, shift the gear again to ensure it's fully back in place, and then the key can be pulled out. 2. Key can't be turned after insertion: This is actually the car's automatic steering wheel lock function, a simple anti-theft feature. To resolve this, turn the key forcefully with your right hand while gently shaking the steering wheel left and right with your left hand, and the key will turn.
1
3
Share

What are the effects of overfilling engine oil?

The effects of overfilling engine oil are: 1. Intense agitation between engine components, leading to excessive engine load and power loss; 2. Oil splashing onto cylinder walls and entering the intake system through the crankcase ventilation system, causing oil burning issues. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add fresh oil. The functions of engine oil are: 1. Reduce friction and high temperatures; 2. Cool down the engine; 3. Clean and remove contaminants; 4. Dampen vibrations; 5. Prevent rust and corrosion.
2
3
Share

How to Replace the Spark Plugs of Chery Tiggo 3?

Chery Tiggo 3's spark plug replacement method is as follows: 1. Clean the dust around the engine cylinder wires to prevent dust from entering the engine during replacement; 2. Use a wrench to loosen the spark plugs in the engine, remove the old spark plugs, then install the new spark plugs and screw them back in. The Chery Tiggo 3 is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, fuel tank capacity 55 liters, and trunk capacity 550 liters. The Chery Tiggo 3 is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 116.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.