How to Reset the Maintenance Wrench Light on a Peugeot 307?

1 Answers
ODeclan
07/30/25 8:59am
Insert the car key without starting the vehicle or turn off the ignition switch. Press and hold the small black button below the dashboard without releasing it. Turn on the ignition switch, noting that only the power needs to be on, and there is no need to start the vehicle. At this point, the odometer's mileage numbers will count down. Wait until the number decreases to 0, then turn off the ignition switch. Finally, release the small black button. Relevant introduction to the Dongfeng Peugeot 307 is as follows: 1. The Dongfeng Peugeot 307 is an elegant and highly distinctive car. Its front face resembles the majestic appearance of a lion, with the two headlights shining like the eyes of a lion, exuding authority without anger—a characteristic inherited from the Peugeot series. From the side, it boasts a unique personality with smooth and harmonious overall lines. The front fender flows over the upper body, the curved roof integrates with the rear triangular window and spoiler, naturally outlining the curved contour of the trunk. The transition between the trunk and spoiler is seamless, with the rear lights cleverly embedded. The overall exterior is balanced and symmetrical, exuding strength and harmony. 2. The Peugeot 307 is equipped with a 1.6L CVVT engine, delivering a maximum power of 117kW and a peak torque of 150Nm, with a 10% increase in power and a 10% reduction in fuel consumption. It is paired with either a 4-speed manual/automatic transmission or a 5-speed automatic transmission. Like other models in the series, it features a transverse-mounted engine, front-wheel drive, four-wheel independent suspension, and comprehensive active and passive safety features, with thoughtful human-centric design throughout. The wheelbase extends to 2.61 meters. The car measures 4.47 meters in length, 1.76 meters in width, and 1.51 meters in height, with a trunk capacity of 506 cubic decimeters, making it a standout in its class.
Was this review help?
2
1
Share
More Forum Discussions

What are the causes of brake pulling?

Brake pulling is caused by: 1. Inconsistent braking force between the wheels on both sides of the vehicle, especially the wheels on both sides of the steering axle; 2. Uncoordinated movement of the suspension guide rods and steering system tie rods during braking; 3. Improper loading on both sides of the vehicle; 4. Inconsistent road adhesion on both sides. Brake pulling refers to the phenomenon where the vehicle automatically veers to one side during braking, which is an important factor affecting traffic safety. If the vehicle pulls to the left when braking during driving, it indicates poor braking performance of the right wheel, and vice versa for the left wheel. After braking to a stop, check the tire drag marks on the road surface. The wheel with shorter or no drag marks is the one with braking issues.
6
2
Share

What are the weaknesses of the Mitsubishi Outlander?

Here are the weaknesses of the Mitsubishi Outlander: Power: Starting with the powertrain from GAC Mitsubishi, the Outlander is equipped with 2.0L and 2.4L engines produced by Mitsubishi Motors Corporation, paired with a CVT transmission. That is, it uses imported engines. Although the Outlander performs well in noise insulation, the engine noise when cold is still relatively loud, which is one of its drawbacks. Design: There are also some minor flaws in the Outlander's seat design. The rear seats are very firm, with a flat seat cushion angle and a steep backrest angle. The position of the safety buckle is not very well designed, making rear passengers quite uncomfortable during long rides. Despite the Outlander's spacious rear seating area, it fails to provide good comfort, turning what should be an advantage into a disadvantage.
12
4
Share

How many electric motors does the Ferrari SF90 have?

The Ferrari SF90 is equipped with three electric motors, distributed on both the front and rear axles, and utilizes a ternary lithium-ion battery. These three motors, combined with a 3.9T twin-turbocharged engine, deliver a combined power output of 735 kW and a combined torque of 900 Nm. The drivetrain features a mid-engine layout with all-wheel drive (AWD), specifically an electric all-wheel-drive system. The Ferrari SF90 is a sports car introduced by Ferrari, with dimensions of 4704 mm in length, 1973 mm in width, and 1191 mm in height, and a wheelbase of 2650 mm. Both front and rear brakes are ceramic ventilated discs, and the body structure is of a unibody design. The front tire specification is 255/35R20, while the rear tire specification is 315/30R20.
12
4
Share

Do You Need to Press the Accelerator When Reversing in an Automatic Transmission Car?

When reversing in an automatic transmission car, you generally do not need to press the accelerator. Simply shift into the R (Reverse) gear and release the brake, and the car will move backward automatically. However, in certain situations such as when on a slope or when the wheels are on a speed bump, the idle power of the engine may not be sufficient to overcome the resistance. In such cases, you may need to lightly press the accelerator to assist in reversing. An automatic transmission eliminates the need for the driver to manually shift gears, as the vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, automatic transmission cars have six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
16
4
Share

Where is the tire pressure reset button on the Great Wall Pao?

The tire pressure reset button for the Great Wall Pao is the SET button on the central dashboard. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing a tire pressure fault. There are generally three reasons for abnormal tire pressure: Abnormal tire pressure: The system typically alerts when the pressure is below 1.8 bar or above 3.0 bar. In such cases, tire inspection and pressure adjustment are required. Failure to reset the tire pressure monitoring: After inflating the tires, if the tire pressure is not reset promptly, the monitoring system will retain the previous data, causing the tire pressure warning light to illuminate. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, it can trigger the tire pressure warning light. In case of sensor damage, the only solution is to replace it with a new component.
13
5
Share

Can Green and Red Antifreeze Be Mixed?

Whether green and red antifreeze can be mixed depends on the brand and composition of the antifreeze. Antifreeze of different brands or compositions should not be mixed. This is because the production formulas of antifreeze from different brands may vary, and mixing them could lead to chemical reactions between various additives, rendering them ineffective. Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion year-round. It also prevents the coolant from freezing and expanding in cold winters, which could otherwise crack the radiator or damage the engine cylinder block or head. The main components of antifreeze are: 50% pure water, 40% methanol, and 10% other substances. It is generally categorized into three types: ethanol-water, glycerol-water, and ethylene glycol-water.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.