How to reset the maintenance wrench light for the 2011 Chery E5?

1 Answers
CassandraFitz
07/30/25 2:02am
Turn off the ignition switch and shut down the engine. Locate the "Menu Toggle" button on the steering wheel, which is the button with two overlapping squares. Press and hold the "Menu Toggle" button, then turn the ignition switch to the "ON" position. After the car powers on, it will begin self-inspection. Continue holding the "Menu Toggle" button until the self-inspection is complete (approximately 5 seconds), and the maintenance light will be reset. Restart the car, and the maintenance light will no longer illuminate.
Was this review help?
19
3
Share
More Forum Discussions

What maintenance items are required for a car at 40,000 kilometers?

When a car reaches 40,000 kilometers, the following maintenance items are required: 1. Replace engine oil (lubricant) and oil filter: Must be replaced every 5,000 kilometers or six months. If using full synthetic oil, it can be replaced up to every 8,000 kilometers. 2. Replace air filter and cabin air filter: The air filter and cabin air filter should be replaced every 20,000 kilometers or two years. 3. Replace fuel filter, brake fluid, and transmission fluid: For automatic transmission models, transmission fluid should also be replaced; for rear-wheel-drive vehicles, differential oil should also be replaced. 4. Tires older than four years can be considered for replacement. Brake rotors can be replaced if the brake pads have been changed three times. 5. Battery: A car battery should normally be replaced every two years. Even if the car hasn't driven 40,000 kilometers in two years, the battery should be checked for discharge.
10
1
Share

Where is the airbag computer located in the Buick Excelle?

The airbag control module is generally located in front of the gear shift lever or underneath it. Areas marked with AIRBAG or SRS in the vehicle indicate airbag locations. Use a diagnostic tool to check for faults in the airbag system, then perform repairs based on the fault codes. If no faults are detected, the system can simply clear any existing error codes. Additional information: 1. Introduction: The Buick Excelle is based on General Motors' global platform. Its prototype was GM's newly developed global mid-size sedan, primarily designed and developed by GM Daewoo Auto & Technology (GMDAT). 2. Development History: On April 21, 2003, SAIC-GM launched this all-new mid-size sedan, marketed as the "mid-range Buick" Excelle. SAIC-GM officially entered the promising mid-size car market with this new product platform - the Buick Excelle.
5
5
Share

How are automotive air flow sensors classified?

Automotive air flow sensors can be categorized into the following types: 1. Flap-type air flow sensor: Installed between the air filter and throttle in gasoline engines, its function is to detect the engine's intake air volume, convert the detection results into electrical signals, and input them into the microcomputer. This sensor consists of two parts: an air flow meter and a potentiometer. 2. Karman vortex air flow sensor: To overcome the shortcomings of the flap-type air flow sensor, i.e., to extend the measurement range while ensuring measurement accuracy and eliminate sliding contacts, a compact and lightweight air flow sensor was developed, namely the Karman vortex air flow sensor. 3. Temperature and pressure compensated air flow sensor: Mainly used for flow measurement of medium fluids in industrial pipelines, such as gases, liquids, steam, and other media. Its characteristics include small pressure loss, wide range, high accuracy, and it is almost unaffected by fluid density, pressure, temperature, viscosity, and other parameters when measuring working condition volumetric flow.
17
1
Share

Why does the Vezel dashboard change colors?

Because the Vezel features a multi-color dashboard that indicates fuel consumption levels while driving. Here is some knowledge about the Honda Vezel: 1. Introduction: With its avant-garde design leading the trend, the Vezel targets the post-80s generation—early adopters of new things who dare to experience and enjoy spreading trends. As a forward-looking model pioneering the market for the new generation of post-80s users, the Vezel embodies a worldview that resonates with young people—bravely breaking boundaries, boldly disrupting the world, and encouraging youth to stay unrestrained and courageous in action. 2. Exterior: The Vezel's exterior design philosophy is "Dynamic-Cross-Solid," perfectly blending the seemingly contradictory elements of a coupe's stylish appearance and an SUV's powerful image, while pointing the way for new directions in SUV design. This pioneering design concept is powerfully presented through a bold front fascia, a coupe-style cabin, a robust lower body, and five dynamic exterior color options.
5
5
Share

Where is the horn relay located in the Buick Excelle?

The relay is located in the control cabinet or control box. Here is some additional information: 1. Introduction: The Buick Excelle is based on General Motors' global platform. The prototype of the Excelle is a globally developed mid-size sedan designed and developed by General Motors Daewoo Auto & Technology (GMDAT). 2. Development History: On April 21, 2003, SAIC[1] General Motors launched the Excelle, referred to as the "mid-level Buick." SAIC[1] General Motors officially entered the promising mid-size car market with the launch of the "Buick Excelle," based on a new product platform. On September 18, 2019, the Buick Excelle National VI version was released, featuring three models equipped with a 1.3L naturally aspirated engine. The new car comes with the latest generation of Buick eConnect technology, standard six airbags, and a body with high-strength steel usage reaching 65%.
6
3
Share

When exiting the parking space, at what position should you turn the steering wheel?

When the vehicle is moving straight, wait until the rear wheels of your car have passed or are parallel with the front wheels of the cars on either side. At this point, turning the steering wheel left or right will not collide with the adjacent vehicles. Turn the steering wheel when the possibility of collision with oncoming vehicles is minimized. Additional information: 1. Turning left when exiting: When driving out of the parking space, if there is ample space on both sides of the vehicle, for a left turn, wait until the B-pillar of your vehicle aligns with the front bumper of the car on the left before turning. 2. Turning right when exiting: Similarly, for a right turn, wait until the B-pillar aligns with the front bumper of the car on the right before turning. However, it is important to note that sometimes the cars on either side may not be parked properly. Therefore, when turning left while exiting, try to stay as far right as possible to create enough space and avoid scraping the adjacent vehicles.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.